INTRODUCTION
The REMCOR “CH” Series Water Chillers (Models
On closed loop systems, the Unit is provided with a pump and reservoir for recirculation of water from the chiller to the process. On tank cooling systems, the Unit is provided without the reservoir and the pump is optional for recirculation of water from the chiller to the tank. Control temperature is sensed on the outlet of the chiller for closed loop systems and it is sensed on the inlet of the chiller for tank cooling systems.
The temperature control options consist of a general purpose digital thermostat and an electronic differential thermostat to satisfy the temperature control requirements. Both options include a digital thermometer for moni- toring system temperature.
The pump options consist of a small magnetic drive pump as standard with a variety of magnetic drive and posi- tive displacement pumps available for particular flow and pressure requirements. An optional bypass valve is available for the pump circulation system. (This valve is standard on Units utilizing the positive displacement pumps). This can be used to adjust pump flow and pressure to match process requirements. This valve also allows internal recirculation within the chiller in the event the chiller outlet is obstructed.
SPECIFICATIONS
|
|
|
|
|
|
|
|
| |
Condensing Unit Horse Power | 3/4 | 3/4 | 1 | |
|
|
|
| |
Electrical (Volts/Phase/Hz) | 115/1/60 | 230/1/60 | 230/1/60 | |
|
|
|
|
|
F.L.A. (Amps) |
| 17 | 8.5 | 10 |
|
|
|
| |
Reservoir Capacity (Gal) | 5 | 5 | 5 | |
|
|
|
| |
Refrigerant | 3.5 | 3.5 | 4.0 | |
|
|
|
| |
Stainless Steel Connections | ||||
|
|
|
| |
Operating Water Temperature | 40° | 40° | 40° | |
Range |
|
|
|
|
|
|
|
|
|
Net Weight (Lbs) |
| 175 | 175 | 175 |
|
|
|
| |
Dimensions Depth (inches) | ||||
Width | (inches) | |||
Height | (inches) | |||
|
|
|
|
|
1 | 91256 |