Gladiator Garageworks Freezer manual Lowercompartment Features, To remove and replace a shelf

To remove and replace the upper compartment floor:

f.Remove all items from the compartment floor.

2.Remove the floor by raising the front and lifting it out.

3.Replace the floor by inserting the two rear tabs into the holes in the rear of the lower compartment. Lower the floor onto the liner of the lower compartment.

::::: : :::: ::: :::: : ::::::::::::

LOWERCOMPARTMENT

FEATURES

Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word "Accessory." Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the toll-free number on the cover or in the "Assistance or Service" section.

The shelves in your freezer are adjustable to match your individual storage needs.

Storing similar food items together in your freezer and adjusting

the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time

the freezer door is open, and save energy.

To remove and replace a shelf:

1.Remove the shelf by tilting it up at the front and lifting it out of the shelf supports.

2.Replace the shelf by guiding the rear shelf hooks into the shelf supports. Tilt the front of the shelf up until rear shelf hooks drop into the shelf supports. Check to make sure that the shelf is securely in position.

There are two half-width wire baskets in your freezer.

To remove and replace a half-width basket:

1.Remove all items from basket. Remove the basket by lifting the front out of the slides, then lifting the basket out.

2.Replace the wire basket by lowering the basket into the slides then pushing the basket backwards until it is under the shelf.

To remove and replace full width wire basket:

1.Remove all items from basket. Remove the basket by lifting the front out of the ball-bearing slides, then lifting the basket out.

2.Replace the wire basket by first extending the ball-bearing slides, then lowering the tabs on the sides of the wire basket

into the slides. Push the basket backwards until it is under the shelf.

!

\