Aiphone NDRM manual 3D. System Used with LEF-5-NE Masters Wiring Diagram, LEW-5-NE/B NE-NVP-RA-LE

3 WIRING DIAGRAMS

3D. SYSTEM USED WITH LEF-5-NE MASTERS WIRING DIAGRAM:

Mother Board	Intercom	LEW-5-NE/B	NE-NVP-RA-LE
CP-543A	CP-544A #1

+		A+	1				N1	D1	Red
-		A-	E				N2	D2	Blk
			H
PS-2420UL							N3	D3	Gray
		B-
							N4	D4
		B+
			Moment				N5	D5	Grn
		CN 1
			NO						wire
			COM
			NC				NE		Blu
			Const					NAR-2A*
			NO						Pur
			COM				H	Blue	Org
		H						Blue
		Q					Q
		E							Yel
		S				LEF-5-NE
			4						* Reset Button:
		B				1	L1
		Y	E						(Any normally closed
		V1	H			K1	K1		button or keyswitch.
				Wire each					Not required when
		A1				2	L2		resetting the call from
		V2		station to a		K2	K2		the master.)
			Moment	designated
		A2	NO	number station		3	L3		NE-NVP-LE
				as shown here.
			COM			K3	K3		Red
Ribbon Cable "M"			NC			4	L4
			NO			K4	K4		Blk
			Const
			COM			5	L5		Pur
		To CP-530	CN51			K5	K5		Grn
									wire
	(Included Ribbon Cable #1)					E	LE
						R	RF
						L	NOTES:
							1. "K" Terminal connections are required in this application, with or
					+	+	without door release being included.
							2. Standard NE-NVP/B, NE-NVP-RA or NE-NVP-2DC cannot be
		* Numbered ribbon cables from NDRM			-	-	used in a system with the LEF-5-NE Master stations.
		master determine sub station placement					Specially modified versions of these units must be used.
		on the master console.			PS-1225UL
							The models are identified as:
		Cable 1 connects to CP544 of sub
							NE-NVP-RA-LE (for use with LEF-5-NE)
		stations 1 through 4, cable 2 for station 5
							NE-NVP-LE Vandal proof sub for LEF-5-NE
		through 8, etc. Connection is the same
							NE-NVP-2DC-LE (for use with LEF-5-NE)
		for NDA add-on selectors.
							3. For more detailed information, please refer to the instructions
							included with the LEW-5-NE and the LEF-5-NE.

NDRM-20

Pg. 7