Cabinet Dimensions, Product Dimensions

Mobile Home - Additional Installation Requirements

The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.

Mobile home installations require:

■When this range is installed in a mobile home, it must be secured according to the instructions in this document.

Cabinet Dimensions

Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height.

IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.

Product Dimensions

F	B	C

B C

	E
	M
	H	F
		F
I		K
		K
	J

A. 27⁷⁄₈" (70.8 cm) max. depth with handle

B. 36" (91.4 cm) cooktop height (max.) with leveling legs screwed all the way in*

C. 46⁷⁄₈" (119.1 cm) overall height (max.) with leveling legs screwed all the way in*

D. 29⁷⁄₈" (75.9 cm) width

E. 25⁷⁄₁₆" (64.6 cm) depth. Back of range to front of cooktop**

F. Model/serial rating plate (located on the oven frame behind the top left side of the oven door)

IMPORTANT: Range must be level after installation. Follow the instructions in the “Level Range” section. Using the cooktop as a reference for leveling the range is not recommended.

*Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs.

**Front of door and drawer may extend further forward, depending on styling.

A. 18" (45.7 cm) upper side cabinet to countertop B. 13" (33 cm) max. upper cabinet depth

C. 30" (76.2 cm) min. opening width

D. For minimum clearance to top of cooktop, see NOTE*. E. 30¹⁄₈" (76.5 cm) min. opening width

F. The shaded areas are recommended for installation of rigid gas pipe.

G. 4¹⁄₂" (11.4 cm) H. 8" (20.3 cm)

I. 17" (43.2 cm) J. 2" (5.1 cm) K. 4¹⁄₂" (11.4 cm)

L. 2" (5.1 cm) min. clearance from both sides of range to side wall or other combustible material.

M. Grounded outlet

N. Cabinet door or hinges should not extend into the cutout.

*NOTE: 24" (61.0 cm) minimum when bottom of wood or metal cabinet is covered by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.

W10526974A specifications

The Whirlpool W10526974A is an exceptional appliance designed to enhance the efficiency and convenience of modern laundry routines. This model is a replacement part specifically crafted for certain Whirlpool washing machines, ensuring compatibility and optimal performance. Its design reflects the brand's commitment to quality, integrating advanced technologies aimed at improving the user experience.

One of the standout features of the Whirlpool W10526974A is its durable construction. Made from high-quality materials, this part is designed to withstand significant wear and tear, ensuring longevity and reliability. This resilience is particularly important in household appliances, where frequent use can lead to common issues. By investing in the W10526974A, users can maintain the performance of their washing machines without compromising on durability.

Moreover, the Whirlpool W10526974A incorporates innovative technologies that contribute to its functionality. It is engineered with precision to ensure smooth operation, minimizing the risk of malfunctions and breakdowns. This technology not only enhances the longevity of the washing machine but also improves efficiency, allowing users to complete their laundry tasks quickly and effectively.

Another advantage of this replacement part is its user-friendly design. Installation is straightforward, making it accessible for individuals with basic DIY skills. Whirlpool has taken user convenience into account, providing clear instructions that accompany the part, enabling quick and hassle-free setup. This feature eliminates the need for professional assistance, saving both time and money for homeowners.

In addition to its practical features, the Whirlpool W10526974A also aligns with modern sustainability practices. Whirlpool is known for its commitment to environmentally friendly products, and this model is no exception. By ensuring efficient performance, it helps reduce water and energy consumption, contributing to a more sustainable household.

Lastly, Whirlpool's reputation for excellent customer support and service adds to the overall appeal of the W10526974A. Owners can have peace of mind knowing that they are backed by a trusted brand that prioritizes customer satisfaction. In conclusion, the Whirlpool W10526974A is a reliable, efficient, and user-friendly part that enhances the performance of compatible washing machines, making it a valuable addition to any laundry setup.