Verify Anti-Tip Bracket Is Installed Engaged

3.Use a ¹⁵⁄₁₆" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked.

WARNING

B C

A. Gas pressure regulator B. Use pipe-joint compound.

C. Adapter (must have ½" male pipe thread)

D. Flexible connector

H G F

E. Manual gas shutoff valve F. ½" or ¾" gas pipe

G.Use pipe-joint compound.

H.Adapter

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Complete Connection

1.Check that the gas pressure regulator shutoff valve is in the “on” position.

A. Gas pressure regulator shutoff valve shown in the “on” position

2.Open the manual shutoff valve in the gas supply line. The valve is open when the handle is parallel to the gas pipe.

A. Closed valve

B. Open valve

3.Test all connections by brushing on an approved noncorrosive leak-detection solution. If bubbles appear, a leak is indicated. Correct any leak found.

4.Remove cooktop burner caps and grates from parts package. Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light. Place burner grates over burners and caps.

A C

A. Burner base

B. Burner cap

C. Burner grate

5.Plug into a grounded 3 prong outlet.

6.Slide range into final location, making sure the rear leveling leg slides into the slot of the anti-tip bracket.

Verify Anti-Tip Bracket Is Installed and

Engaged

On Ranges with a Storage Drawer:

1.Remove the storage drawer. See “Storage Drawer” section.

2.Use a flashlight to look underneath the bottom of the range.

3.Visually check that the rear range foot is inserted into the slot of the anti-tip bracket.

On Ranges with a Warming Drawer or Premium Storage Drawer:

1.Place the outside of your foot against the bottom front of the warming drawer or premium storage drawer, and grasp the lower right or left side of the control panel as shown.

NOTE: If your countertop is mounted with a backsplash, it may be necessary to grasp the range higher than is shown in the illustration.

2.Slowly attempt to tilt the range forward.

If you encounter immediate resistance, the range foot is engaged in the anti-tip bracket.

3.If the rear of the range lifts more than ½" (1.3 cm) off the floor without resistance, stop tilting the range and lower it gently back to the floor. The range foot is not engaged in the anti-tip bracket.

W10526974A specifications

The Whirlpool W10526974A is an exceptional appliance designed to enhance the efficiency and convenience of modern laundry routines. This model is a replacement part specifically crafted for certain Whirlpool washing machines, ensuring compatibility and optimal performance. Its design reflects the brand's commitment to quality, integrating advanced technologies aimed at improving the user experience.

One of the standout features of the Whirlpool W10526974A is its durable construction. Made from high-quality materials, this part is designed to withstand significant wear and tear, ensuring longevity and reliability. This resilience is particularly important in household appliances, where frequent use can lead to common issues. By investing in the W10526974A, users can maintain the performance of their washing machines without compromising on durability.

Moreover, the Whirlpool W10526974A incorporates innovative technologies that contribute to its functionality. It is engineered with precision to ensure smooth operation, minimizing the risk of malfunctions and breakdowns. This technology not only enhances the longevity of the washing machine but also improves efficiency, allowing users to complete their laundry tasks quickly and effectively.

Another advantage of this replacement part is its user-friendly design. Installation is straightforward, making it accessible for individuals with basic DIY skills. Whirlpool has taken user convenience into account, providing clear instructions that accompany the part, enabling quick and hassle-free setup. This feature eliminates the need for professional assistance, saving both time and money for homeowners.

In addition to its practical features, the Whirlpool W10526974A also aligns with modern sustainability practices. Whirlpool is known for its commitment to environmentally friendly products, and this model is no exception. By ensuring efficient performance, it helps reduce water and energy consumption, contributing to a more sustainable household.

Lastly, Whirlpool's reputation for excellent customer support and service adds to the overall appeal of the W10526974A. Owners can have peace of mind knowing that they are backed by a trusted brand that prioritizes customer satisfaction. In conclusion, the Whirlpool W10526974A is a reliable, efficient, and user-friendly part that enhances the performance of compatible washing machines, making it a valuable addition to any laundry setup.