Whirlpool W10204316B, W10204510A General Cleaning, Exterior Porcelain Enamel Surfaces on some

Page 9

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products. For additional information, you can visit the Frequently Asked Questions (FAQs) section of our website at www.estateappliances.com, www.roperappliances.com or www.whirlpool.com.

Soap, water and a soft cloth or sponge are suggested first unless otherwise noted.

Metal marks from aluminum and copper

Clean with Cooktop Cleaner as soon as cooktop has cooled down. The marks will not totally disappear, but after many cleanings they will become less noticeable.

Tiny scratches and abrasions

Use Cooktop Cleaner for scratches. Scratches and abrasions do not affect cooking performance, and after many cleanings they will become less noticeable.

EXTERIOR PORCELAIN ENAMEL SURFACES (on some

models)

Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire range is cool. These spills may affect the finish.

Cleaning Method:

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad:

Gently clean around the model and serial number plate because scrubbing may remove numbers.

All-Purpose Appliance Cleaner Part Number 31682 (not included):

See cover for contact information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner, steel-wool pads, gritty washcloths or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-time or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

Stainless Steel Cleaner and Polish Part Number 31462 (not included):

See cover for contact information.

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers, ammonia or sodium hydroxide (lye) because paint surface may stain.

CERAMIC GLASS (on some models)

Cleaning Method:

Cooktop Cleaner Part Number 31464 is recommended regularly to help avoid scratches, pitting and abrasions and to condition the cooktop.

Cooktop Scraper Part Number WA906B is also recommended for stubborn soils. These can be ordered as accessories. See cover for contact information. The Cooktop Scraper uses razor blades. Store razor blades out of the reach of children.

Do not use steel wool, abrasive powder cleansers, chlorine bleach, rust remover or ammonia because damage may occur.

Light to moderate soil

Clean with paper towels or clean damp sponge

Sugary spills (jellies, candy, syrup)

Clean with cooktop scraper and cooktop cleaner. Scrape off sugary spills while the cooktop is still warm. You may want to wear oven mitts while cleaning the cooktop.

Heavy soil, dark streaks, specks and discoloration

Clean with Cooktop Cleaner or nonabrasive cleanser:

Burned-on soil

Clean with Cooktop Cleaner and Cooktop Scraper.

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool, abrasive cleansers or oven cleaner.

Do not soak knobs. When replacing knobs, make sure knobs are in the OFF position.

On some models, do not remove seals under knobs.

Cleaning Method:

Soap and water:

Pull knobs straight away from control panel to remove.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive cleaners, steel-wool pads, gritty washcloths or abrasive paper towels.

Cleaning Method:

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on panel.

All-Purpose Appliance Cleaner Part Number 31682 (not included):

See cover for contact information.

COIL ELEMENTS (on some models)

Cleaning Method:

Damp cloth: Make sure control knobs are off and elements are cool.

Do not clean or immerse in water. Soil will burn off when hot.

BURNER BOWLS (on some models)

Before removing or replacing coil elements and burner bowls, make sure they are cool and the control knobs are in the OFF position.

Remove the coil element by pushing the edge of the coil element toward the receptacle. Lift it enough to clear the burner bowl. Pull the coil element straight away from the receptacle to remove. Lift out the burner bowl.

Cleaning Method:

Chrome burner bowls

Wash frequently in warm, soapy water. (It is not recommended to wash chrome bowls in a dishwasher). A mild abrasive cleaner and a plastic scrubber can be used to remove stubborn stains.

For heavily soiled bowls, place an ammonia soaked paper towel on the stains and allow to soak for a short time, then gently scrub with a plastic scrubber.

SURFACE UNDER COOKTOP (on some models)

The coil cooktop will lift up to provide easy access for cleaning beneath. Lift the cooktop by both front corners until the support locks into place.

Cleaning Method:

Steel-wool pad

To avoid damage to the range, do not remove the cooktop.

9

Image 9
Contents Electric Range User Instructions Anti-Tip Bracket Range SafetyImportant Safety Instructions Feature Guide Cooktop USE Electronic Oven Controls Oven USEAluminum Foil Positioning Racks and BakewareOven Vent Baking and RoastingBroiling To Self-Clean Self-Cleaning Cycleon some modelsRange Care Prepare RangeExterior Porcelain Enamel Surfaces on some General CleaningStainless Steel on some models Surface Under Cooktop on some modelsOven Light TroubleshootingAccessories Items Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Implied Warranties Limitation of Remedies

W10204316B, W10204510A specifications

The Whirlpool W10204510A and W10204316B are two innovative kitchen appliance components that exemplify modern technology and efficiency. Designed primarily for use in Whirlpool refrigerators and freezers, these components enhance user experience through their advanced features and reliability.

The Whirlpool W10204510A is primarily a refrigerator water filter. This filter is engineered to reduce contaminants found in water, including chlorine, lead, and other potentially harmful substances. The design of the filter emphasizes convenience, with an easy-to-install system that requires no specialized tools. Its efficient filtration process not only provides cleaner drinking water but also improves the taste and odor of the water dispensed from the refrigerator. The filter has a lifespan of approximately six months or 200 gallons, ensuring longevity and cost-effectiveness for users.

On the other hand, the Whirlpool W10204316B is known as a water filter bypass plug. This component serves a specific function for those who may choose not to use a water filter in their refrigerator. The bypass plug allows water to flow through the system without filtration, making it a necessary part for optimal operation when a filter is not being used. Its construction is durable, ensuring that it can withstand the rigors of regular use while maintaining a tight seal to prevent any leaks.

Both components are designed with user convenience in mind. The filters often come with easily recognizable indicators that notify users when it is time for a replacement. This feature saves users from the hassle of keeping track of filter changes manually. Moreover, the components are made from high-quality materials that are compliant with industry standards, ensuring that they do not leak harmful substances back into the water supply while maintaining effective performance.

Together, the W10204510A and W10204316B represent Whirlpool's commitment to providing practical, efficient, and advanced appliance solutions for households. These components highlight the brand's focus on health and safety, quality, and user-friendly design, making them essential parts of modern kitchen environments. Users can enjoy peace of mind knowing they have access to cleaner water and streamlined functionality in their refrigerators, enhancing their overall kitchen experience.