Verify Anti-Tip Bracket Is Installed Engaged

Verify Anti-Tip Bracket Is Installed and

Engaged

On Ranges with a Storage Drawer:

1.Remove the storage drawer. See “Storage Drawer” section.

2.Use a flashlight to look underneath the bottom of the range.

3.Visually check that the rear range foot is inserted into the slot of the anti-tip bracket.

On Ranges with a Warming Drawer or Premium Storage Drawer:

1.Place the outside of your foot against the bottom front of the warming drawer or premium storage drawer, and grasp the lower right or left side of the control panel as shown.

NOTE: If your countertop is mounted with a backsplash, it may be necessary to grasp the range higher than is shown in the illustration.

5.Slide range back so the rear range foot is inserted into the slot of the anti-tip bracket.

IMPORTANT: If the back of the range is more than 2" (5.1 cm) from the mounting wall, the rear range foot may not engage the bracket. Slide the range forward and determine if there is an obstruction between the range and the mounting wall. Changes to the gas supply must be performed by a qualified service technician. If you need assistance or service, refer to the “Assistance or Service” section of the Use and Care Guide, or the cover or “Warranty” section of the User Instructions, for contact information.

6.Repeat steps 1 and 2 to ensure that the range foot is engaged in the anti-tip bracket.

If the rear of the range lifts more than ½" (1.3 cm) off the floor without resistance, the anti-tip bracket may not be installed correctly. Do not operate the range without anti-tip bracket installed and engaged. Please reference the “Assistance or Service” section of the Use and Care Guide, or the cover or “Warranty” section of the User Instructions, to contact service.

2.Slowly attempt to tilt the range forward.

If you encounter immediate resistance, the range foot is engaged in the anti-tip bracket.

3.If the rear of the range lifts more than ½" (1.3 cm) off the floor without resistance, stop tilting the range and lower it gently back to the floor. The range foot is not engaged in the anti-tip bracket.

IMPORTANT: If there is a snapping or popping sound when lifting the range, the range may not be fully engaged in the bracket. Check to see if there are obstructions keeping the range from sliding to the wall or keeping the range foot from sliding into the bracket. Verify that the bracket is held securely in place by the mounting screws.

4.Slide the range forward, and verify that the anti-tip bracket is securely attached to the floor or wall.

Level Range

Determine if you have AquaLift® Technology or Steam Clean by referring to the “Range Care” section of the User Instructions.

For Ranges with AquaLift® Technology or Steam Clean:

1.Place level on the oven bottom as indicated in one of the two figures below depending on the size of the level. Check with the level side to side and front to back.

2.If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket.

3.Follow the directions in Style 1 or Style 2, depending on the style of drawer supplied with the range.

For Ranges without AquaLift® Technology or Steam Clean:

1.Place a standard flat rack in oven.

2.Place level on the rack and check levelness of the range, first side to side; then front to back.

3.If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket.

4.Follow the directions in Style 1 or Style 2, depending on the style of drawer supplied with the range.

Style 1: Ranges Equipped with a Storage Drawer:

Use a ¼" drive ratchet, wrench or pliers to adjust leveling legs up or down until the range is level. Push range back into position. Check that rear leveling leg is engaged in the anti-tip bracket.

Style 2: Ranges Equipped with a Warming Drawer or Premium Storage Drawer:

Use a wrench or pliers to adjust leveling legs up or down until the range is level. Push range back into position. Check that rear leveling leg is engaged in the anti-tip bracket.

NOTE: Range must be level for satisfactory baking performance and best cleaning results using AquaLift® Technology and Steam Clean functions.

W10553363A specifications

The Whirlpool W10553363A is an innovative and versatile appliance designed to enhance the functionality of modern kitchens. As one of the leading brands in home appliances, Whirlpool has integrated advanced technologies and user-friendly features into this product, making it a reliable choice for a variety of culinary needs.

One of the standout features of the W10553363A is its spacious interior, which provides ample room for food storage and organization. With several adjustable shelves, users can customize the storage space to accommodate items of varying sizes, ensuring maximum efficiency when storing groceries or leftovers. The appliance typically includes a variety of compartments, allowing for easy categorization of food items, while maintaining an optimal cold environment.

The W10553363A is also equipped with advanced cooling technologies. This includes a state-of-the-art cooling system that ensures consistent temperature control throughout the interior. This is essential for keeping perishables fresh for longer periods. Additionally, the appliance often features a frost-free design, eliminating the hassle of defrosting while reducing moisture build-up.

Energy efficiency is another critical aspect of the Whirlpool W10553363A. Designed with eco-friendly technologies, this appliance typically operates on lower energy consumption, helping users save on electricity bills while minimizing their environmental footprint. This commitment to sustainability has made it a popular choice among environmentally-conscious consumers.

Convenience is also a key attribute of the W10553363A. Many units come with smart technology options, including Wi-Fi connectivity, enabling users to monitor and control the appliance remotely through a mobile app. This allows users to adjust temperatures, set alarms, and receive notifications about food freshness, making kitchen management more efficient.

Moreover, the Whirlpool W10553363A often features easy-to-use controls and a sleek design, making it a stylish addition to any kitchen decor. With an emphasis on both functionality and aesthetics, it meets the needs of busy households while complementing modern home designs.

In summary, the Whirlpool W10553363A stands out due to its spaciousness, advanced cooling technologies, energy efficiency, and user-friendly features. It truly represents Whirlpool's commitment to delivering high-quality, innovative appliances that cater to the demands of contemporary kitchens, ensuring that users can enjoy a seamless cooking and storage experience.