Electronic Ignition System

Initial lighting and gas flame adjustments

Cooktop and oven burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to the “LITE” position, the system creates a spark to light the burner. This sparking continues, as long as the control knob is turned to “LITE.”

When the oven control is turned to the desired setting, sparking occurs and ignites the gas.

Check Operation of Cooktop Burners

Standard Surface Burners

Push in and turn each control knob to the “LITE” position.

The flame should light within 4 seconds. The first time a burner is lit, it may take longer than 4 seconds to light because of air in the gas line.

If burners do not light properly:

■Turn cooktop control knob to the “OFF” position.

■Check that the range is plugged in. Check that the circuit breaker has not tripped or the household fuse has not blown.

■Check that the gas shutoff valves are set to the “open” position.

■Check that burner caps are properly positioned on burner bases.

Repeat start-up. If a burner does not light at this point, turn the control knobs to “Off” and contact your dealer or authorized service company for assistance.

Adjust Flame Height

Adjust the height of top burner flames. The cooktop “low” burner flame should be a steady blue flame approximately ¼" (0.64 cm) high.

A.Low flame

B.High flame

To adjust standard burner:

The flame can be adjusted using the adjustment screw in the center of the valve stem. The valve stem is located directly underneath the control knob.

If the “low” flame needs to be adjusted:

A.Control knob stem

B.Screwdriver

C.Pliers

1.Light 1 burner and turn to lowest setting.

2.Remove the control knob.

Hold the knob stem with a pair of pliers. Use a small flat- blade screwdriver to turn the screw located in the center of the control knob stem until the flame is the proper size.

3.Replace the control knob.

4.Test the flame by turning the control from “LO” to “HI,” checking the flame at each setting.

5.Repeat above steps for each burner.

Check Operation of Oven Bake Burner

1.Remove the oven rack.

2.To remove the oven bottom: Remove 2 screws at the rear of the oven bottom. Lift the rear of the oven bottom up and back until the front of the panel is away from the front frame.

Remove from oven and place on a covered surface.

A.Screws

B.Oven bottom

3.You can check the burner flame by using a mirror.

Insert a mirror to one side of the burner. Look into the mirror to check flame.

4.Push the BAKE pad.

5.Press the START pad.

The oven bake burner should light within 8 seconds. Under certain conditions, it may take the burner up to 50 to 60 seconds to light.

Electronic igniters are used to light the bake and broil burners.

Refer to the Use and Care Guide or User Instructions for proper operation of the oven controls.

Adjust Oven Bake Burner Flame (if needed)

1.On models with a warming drawer, remove access cover plate (1 screw) located at the back of the warming drawer compartment.

2.Check the oven bake burner for proper flame.

This flame should have a ½" (1.3 cm) long inner cone of bluish-green, with an outer mantle of dark blue, and should be clean and soft in character. No yellow tips, blowing or lifting of flame should occur.

W10553363A specifications

The Whirlpool W10553363A is an innovative and versatile appliance designed to enhance the functionality of modern kitchens. As one of the leading brands in home appliances, Whirlpool has integrated advanced technologies and user-friendly features into this product, making it a reliable choice for a variety of culinary needs.

One of the standout features of the W10553363A is its spacious interior, which provides ample room for food storage and organization. With several adjustable shelves, users can customize the storage space to accommodate items of varying sizes, ensuring maximum efficiency when storing groceries or leftovers. The appliance typically includes a variety of compartments, allowing for easy categorization of food items, while maintaining an optimal cold environment.

The W10553363A is also equipped with advanced cooling technologies. This includes a state-of-the-art cooling system that ensures consistent temperature control throughout the interior. This is essential for keeping perishables fresh for longer periods. Additionally, the appliance often features a frost-free design, eliminating the hassle of defrosting while reducing moisture build-up.

Energy efficiency is another critical aspect of the Whirlpool W10553363A. Designed with eco-friendly technologies, this appliance typically operates on lower energy consumption, helping users save on electricity bills while minimizing their environmental footprint. This commitment to sustainability has made it a popular choice among environmentally-conscious consumers.

Convenience is also a key attribute of the W10553363A. Many units come with smart technology options, including Wi-Fi connectivity, enabling users to monitor and control the appliance remotely through a mobile app. This allows users to adjust temperatures, set alarms, and receive notifications about food freshness, making kitchen management more efficient.

Moreover, the Whirlpool W10553363A often features easy-to-use controls and a sleek design, making it a stylish addition to any kitchen decor. With an emphasis on both functionality and aesthetics, it meets the needs of busy households while complementing modern home designs.

In summary, the Whirlpool W10553363A stands out due to its spaciousness, advanced cooling technologies, energy efficiency, and user-friendly features. It truly represents Whirlpool's commitment to delivering high-quality, innovative appliances that cater to the demands of contemporary kitchens, ensuring that users can enjoy a seamless cooking and storage experience.