TROUBLESHOOTING

Shredder will not

a.

Shredder is not plugged in.

operate.

b.

Power switch is in the OFF (O) position.

 

 

Move switch to AUTO (I) position.

 

c.

Shredder is jammed. See "Clearing a

 

 

Jam" section.

 

d. Shredder has exceeded the maximum

 

 

run time and requires a "cool-down"

 

 

time. See "Product Usage Guide" (page

 

 

1).

 

e.

Shredder is not assembled properly.

 

 

See "Assembly."

 

 

Shredder makes a

Cutting blades need to be oiled REGULARLY.

loud squeaking or

See "MAINTENANCE" section.

rubbing noise.

 

 

 

 

 

Shredder suddenly

a.

Shredder has exceeded the maximum

stops while

 

run time and requires a "cool-down"

shredding.

 

time. See "Product Usage Guide" (page

 

 

1).

 

b.

Shredder is jammed. See "OPERATION -

 

 

Clearing a Jam."

 

 

Shredder shreds less

Cutting blades need to be oiled REGULARLY.

than capacity.

See "MAINTENANCE" section.

 

 

Shredder operates

A small piece of paper may be blocking the

only in REVERSE.

auto-start sensor of the shredder. Move the

 

power switch to the OFF (O) position and

 

unplug the shredder. Turn shredder over

 

and use a toothpick (from the underside

 

of the unit) to clear the paper blockage at

 

the auto-start sensor (center) location.

 

 

Shredder runs contin-

A small piece of paper may be causing the

uously when in

auto-start feature to run continuously. Move

AUTO.

the power switch to the OFF (O) position and

 

unplug the shredder. Use a toothpick

 

(from the top of the unit) to clear the

 

paper blockage at the auto-start sensor

 

(center) location.

 

 

Shredder runs for a

This is normal. The shredder runs a few sec-

few seconds after

onds longer than the paper in order to keep

the paper has cleared

the cutters clear of paper particles and reduce

the cutters.

the chances of a jam.

 

 

 

LIMITED WARRANTY

Fellowes Manufacturing Company (the “Company”) warrants the cut- ting cylinders of the machine to be free from defects in material and workmanship for 3 years from the date of purchase by the original consumer. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defec- tive during the warrant period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part.

This warranty does not apply in cases of abuse, mishandling or unau- thorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequen- tial or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from state to state.

For more detail or to obtain service under this warranty, please con- tact Fellowes Customer Service at 1-800-955-0959, Monday through Friday, 8 AM - 5 PM (Central Standard Time).

For specific instructions on obtaining service under this warranty on machines purchased outside the USA, contact the appropriate location listed in the Contact for Service section of this instruction manual.

Warrantor: Fellowes, Inc.

4

Page 5
Image 5
Fellowes P400C-2, S40C-2 manual Troubleshooting, Limited Warranty