Whirlpool W10173324B Installation Instructions, Unpack Range, Install Anti-Tip Bracket

Page 7

Burner Input Requirements

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8 m) above sea level.

Gas Supply Pressure Testing

Line pressure testing above 1/2 psi gauge (14" WCP)

The range and its individual manual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures greater than 1/2 psi (3.5 kPa).

Line pressure testing at 1/2 psi gauge (14" WCP) or lower

The range must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of that system at test pressures equal to or less than

1/2 psi (3.5 kPa).

INSTALLATION INSTRUCTIONS

Unpack Range

1.Do not use oven door handle to lift or move the range.

2.Remove shipping materials, tape and film from range. Keep cardboard bottom under range. Remove oven racks and parts package from inside oven.

3.Take 4 cardboard corners from the carton. Stack one cardboard corner on top of another. Repeat with the other 2 corners. Place them lengthwise on the floor behind the range to support the range when it is laid on its back. Using 2 or more people, firmly grasp the range and gently lay it on its back on the cardboard corners.

4.Pull cardboard bottom firmly to remove.

5.Use an adjustable wrench to loosen the leveling legs. Adjust the leveling legs to the correct height. Leveling legs can be loosened to add up to a maximum of 1" (2.5 cm). A maximum of 3/16" (5 mm) is needed to engage the anti-tip bracket.

NOTE: If height adjustment is made when range is standing, tilt the range back to adjust the front legs, then tilt forward to adjust the rear legs.

6.Place cardboard or hardboard in front of range. Using 2 or more people, stand range back up onto cardboard or hardboard.

A

A. Cardboard shipping base

Install Anti-Tip Bracket

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

Contact a qualified floor covering installer for the best procedure for drilling mounting holes through your type floor covering.

Before moving range, slide range onto shipping base, cardboard or hardboard.

1.Remove template from the anti-tip bracket kit (found inside the oven cavity).

2.Place template on the floor in the cabinet opening so that the left edge is against the cabinet and the top edge is against the rear wall, molding or cabinet.

3.Tape template in place.

4.If the countertop is not flush with the cabinet opening edge, align the template with the overhang.

If the cabinet opening is wider than specified in the “Location Requirements” section, adjust the template so the range will be centered in the cabinet opening.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Installation Instructions 20 50.8 CM Freestanding GAS Range Índice Range SafetyPage Tools and Parts Installation RequirementsLocation Requirements Countertop Product Dimensions Installation ClearancesGas Pressure Regulator Gas Supply RequirementsType of Gas Gas Supply LineUnpack Range Installation InstructionsInstall Anti-Tip Bracket Gas Supply Pressure TestingLevel Range Verify Anti-Tip Bracket LocationComplete Connection Make Gas ConnectionTypical flexible connection Check Operation If the low flame needs adjustingTo Light Standing Pilot Lights If range does not operate, check the following Complete InstallationIf the flame needs adjusting Check Operation of Oven/Broil BurnerLP Gas Conversion GAS ConversionsTo Convert Gas Pressure Regulator To Convert Surface Burners Pilot and Bypass Screws ConversionTo Convert Oven Burner Complete Conversion Natural Gas Conversion To Convert Surface Burners To Convert Oven Burner Pilot and By-pass Screws Conversion Seguridad DE LA Estufa Page Herramientas y piezas Requisitos DE InstalaciónRequisitos de ubicación Espacios libres para instalación Las instalaciones en casas rodantes necesitanMedidas del producto Línea de suministro de gas Requisitos del suministro de gasTipo de gas Desempaque la estufa Instrucciones DE InstalaciónInstalación del soporte anti-vuelco Verificación de la ubicación Del soporte anti-vuelco Conexión flexible típica Nivelación de la estufaConexión del suministro de gas Complete la conexiónPara encender las luces piloto fijas Verifique el funcionamientoSi la llama necesita ajustarse Complete la instalaciónSi la estufa no funciona, revise lo siguiente Conversión de gas LP Conversiones DE GASCómo convertir el regulador de la presión del gas Cómo convertir los quemadores de superficie Conversión de tornillos de desvío y pilotoCómo convertir el quemador del horno Complete la conversión Conversión de gas naturalTapa de bronce Conversión de tornillos de desvío y piloto

W10173324B specifications

The Whirlpool W10173324B is a meticulously crafted appliance designed to elevate your laundry experience, combining functionality with innovative technology. This washer is part of Whirlpool's commitment to providing reliable, efficient, and user-friendly laundry solutions.

One of the standout features of the W10173324B is its advanced washing technologies. It employs an Adaptive Wash technology that automatically senses and adapts to each load's needs, ensuring optimal cleaning performance while conserving water and energy. This feature not only enhances the washing experience but also helps in maintaining the quality of fabrics over time.

With a focus on user convenience, the W10173324B comes equipped with a large capacity drum, allowing users to handle bigger loads in fewer cycles. This is particularly beneficial for busy households, as it saves both time and effort. The 4.5 cubic feet capacity ensures that you can wash more clothes, including bulky items like comforters, with ease.

The washer also features a variety of wash cycles and options tailored to different fabric types and stain levels. From delicate items to heavily soiled work clothes, the W10173324B has you covered. The presence of a stubborn stain cycle showcases Whirlpool's dedication to tackling tough stains, providing specialized cleaning for those harder-to-remove marks.

Energy efficiency is another hallmark of the W10173324B. It is designed with eco-friendly features, such as a high-efficiency wash system that uses less water while delivering superior cleaning performance. This not only reduces water consumption but also leads to significant savings on utility bills over time.

Ease of use is paramount, and the W10173324B features a straightforward control panel that makes selecting wash settings simple. Additionally, the appliance comes with a delay start option, allowing users to schedule their laundry at a more convenient time.

In terms of durability, the W10173324B is built from high-quality materials, ensuring it can withstand regular use without compromising performance. The design is sleek and modern, fitting seamlessly into a variety of laundry room aesthetics.

In conclusion, the Whirlpool W10173324B stands out as a top choice for anyone seeking an efficient, versatile, and easy-to-use washing machine. With its combination of cutting-edge technology, user-friendly features, and energy efficiency, it undoubtedly meets the needs of modern households. Whether you're dealing with everyday laundry or specialized cleaning challenges, this washer is equipped to deliver outstanding results.
Top Page Image Contents