Verify Anti-Tip Bracket Location

5.To mount the anti-tip bracket to a wood floor, drill two 1/8" (3.2 mm) holes at the positions marked on the bracket template. Remove the template from the floor.

To mount the anti-tip bracket to a concrete or ceramic floor, use a 3/16" (4.8 mm) masonry drill bit to drill 2 holes at the positions marked on the bracket template. Remove the template from the floor.

6.Tap plastic anchors into holes with a hammer.

7.Align the anti-tip bracket holes with the holes in the floor. Fasten the anti-tip bracket with the screws provided.

Depending on the thickness of your flooring, longer screws may be necessary to anchor the bracket to the subfloor. Longer screws are available from your local hardware store.

8.Move the range close to the opening. Remove the shipping base, cardboard or hardboard from under the range.

9.Open the broiler door. Use a 3/8" drive ratchet to lower the rear leveling legs one-half turn. Use slip-joint pliers to lower the front leveling legs one-half turn.

A. Rear leveling leg

B. Front leveling leg

10.Adjust the leveling legs to the correct height. Leveling legs can be loosened to add up to a maximum of 1" (2.5 cm). A minimum of 3/16" (5 mm) is needed to engage the anti-tip bracket.

11.Move the range into final position making sure the rear leveling leg slides into the anti-tip bracket.

12.If installing the range in a mobile home, you must secure the range to the floor. Any method of securing the range is adequate as long as it conforms to the standards in the “Location Requirements” section.

13.Continue installing your range using the following installation instructions.

1.Make sure the anti-tip bracket is installed:

■Look for the anti-tip bracket securely attached to the floor.

■Slide the range back so the rear range foot is under the anti-tip bracket.

2.If installing the range in a mobile home, you must secure the range to the floor. Any method of securing the range is adequate as long as it conforms to the standards in the “Location Requirements” section.

A B

A. Anti-tip braket

B. Rear range foot

Level Range

1.Place rack in oven.

2.Place level on rack and check levelness of range, first side to side; then front to back.

3.If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket. Use ³⁄₈" drive ratchet and slip-joint pliers to adjust leveling legs up or down until range is level.

4.Push range back into position.

5. Check that rear leveling leg is engaged in anti-tip bracket.

NOTE: Range must be level for satisfactory baking performance.

W10173324B specifications

The Whirlpool W10173324B is a meticulously crafted appliance designed to elevate your laundry experience, combining functionality with innovative technology. This washer is part of Whirlpool's commitment to providing reliable, efficient, and user-friendly laundry solutions.

One of the standout features of the W10173324B is its advanced washing technologies. It employs an Adaptive Wash technology that automatically senses and adapts to each load's needs, ensuring optimal cleaning performance while conserving water and energy. This feature not only enhances the washing experience but also helps in maintaining the quality of fabrics over time.

With a focus on user convenience, the W10173324B comes equipped with a large capacity drum, allowing users to handle bigger loads in fewer cycles. This is particularly beneficial for busy households, as it saves both time and effort. The 4.5 cubic feet capacity ensures that you can wash more clothes, including bulky items like comforters, with ease.

The washer also features a variety of wash cycles and options tailored to different fabric types and stain levels. From delicate items to heavily soiled work clothes, the W10173324B has you covered. The presence of a stubborn stain cycle showcases Whirlpool's dedication to tackling tough stains, providing specialized cleaning for those harder-to-remove marks.

Energy efficiency is another hallmark of the W10173324B. It is designed with eco-friendly features, such as a high-efficiency wash system that uses less water while delivering superior cleaning performance. This not only reduces water consumption but also leads to significant savings on utility bills over time.

Ease of use is paramount, and the W10173324B features a straightforward control panel that makes selecting wash settings simple. Additionally, the appliance comes with a delay start option, allowing users to schedule their laundry at a more convenient time.

In terms of durability, the W10173324B is built from high-quality materials, ensuring it can withstand regular use without compromising performance. The design is sleek and modern, fitting seamlessly into a variety of laundry room aesthetics.

In conclusion, the Whirlpool W10173324B stands out as a top choice for anyone seeking an efficient, versatile, and easy-to-use washing machine. With its combination of cutting-edge technology, user-friendly features, and energy efficiency, it undoubtedly meets the needs of modern households. Whether you're dealing with everyday laundry or specialized cleaning challenges, this washer is equipped to deliver outstanding results.