Installation Requirements, Tools and Parts

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■Level

■³⁄₈" drive ratchet

■Tape measure

■Flat-blade screwdriver

■Phillips screwdriver

■Hand or electric drill

■Wrench or pliers

■7 mm combination wrench

■Pipe wrench

■¹⁄₈" (3.2 mm) drill bit (for wood floors)

■³⁄₁₆" (4.8 mm) carbide-tipped masonry drill bit (for concrete/ ceramic floors)

■Pipe-joint compound resistant to LP gas

■Noncorrosive leak-detection solution

Parts supplied

Check that all parts are included.

A.Anti-tip bracket

B.Plastic anchors (2)

C.#10 x 1¹⁄₂" screws (2)

■Anti-tip bracket must be securely mounted to subfloor. Thickness of flooring may require longer screws to anchor bracket to subfloor. Longer screws are available from your local hardware store.

Parts needed

Check local codes and consult gas supplier. Check existing gas and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” section.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air.

■It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located on the oven frame behind the left side of the broiler door.

A. Model/serial rating plate location

■The range should be located for convenient use in the kitchen.

■Recessed installations must provide complete enclosure of the sides and rear of the range.

■To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

■All openings in the wall or floor where range is to be installed must be sealed.

■Do not seal the range to the side cabinets.

■Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

■The floor anti-tip bracket must be installed. To install the anti- tip bracket shipped with the range, see “Install Anti-Tip Bracket” section.

■Grounded electrical supply is required. See “Electrical Requirements” section.

■Proper gas supply connection must be available. See “Gas Supply Requirements” section.

■Contact a qualified floor covering installer to check that the floor covering can withstand at least 200°F (93°C).

■Use an insulated pad or ¼" (0.64 cm) plywood under range if installing range over carpeting.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

W10032050B specifications

The Whirlpool W10032050B is an innovative kitchen appliance that embodies modern design, advanced technology, and practicality. Tailored for a variety of cooking needs, this appliance represents a significant step forward for home chefs seeking efficiency and versatility in their kitchen.

One of the defining features of the Whirlpool W10032050B is its convection cooking capability. This technology circulates hot air throughout the oven cavity, ensuring that food cooks evenly and thoroughly. It significantly reduces cooking times while enhancing the flavor and texture of meals. Whether you are roasting vegetables or baking desserts, the convection function ensures consistent results every time.

Another standout characteristic of the W10032050B is its intuitive control panel, which is designed for user-friendliness. The touch controls allow for quick adjustments to temperature and cooking modes, making it easy to switch from baking to broiling or to set precise cooking times. Additionally, the panel often includes a digital display that provides clear information on cooking progress, helping users keep track of their meals without the need for constant checks.

Versatility is further enhanced by the W10032050B's multiple cooking modes. It typically includes options like bake, broil, and roast, giving home cooks the tools they need to execute a wide range of recipes with confidence. Furthermore, the large capacity of the oven can accommodate multiple dishes at once, ideal for family gatherings or dinner parties.

The design of the Whirlpool W10032050B does not go unnoticed either. Built with a sleek and modern aesthetic, this appliance integrates seamlessly into any kitchen décor. Its stainless steel finish not only provides a professional look but is also easy to clean and maintain.

Safety is another priority for Whirlpool, and this model often includes features such as a self-cleaning function that makes maintaining the oven a hassle-free experience. Additionally, the appliance may come equipped with safety lock features to prevent accidental operation, especially in households with young children.

In summary, the Whirlpool W10032050B stands out in the crowded market of kitchen appliances due to its powerful convection cooking capabilities, user-friendly controls, versatile cooking options, and stylish design. It provides everything that a modern home cook could need, making meal preparation not only easy but also enjoyable. This appliance is a smart investment for those aiming to elevate their culinary experience while ensuring convenience and efficiency in the kitchen.