Whirlpool W10130752A GAS Conversions, LP Gas Conversion, To Convert Gas Pressure Regulator

Page 12

GAS CONVERSIONS

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

NOTE: Gas conversions (from natural gas to LP gas or from LP gas to natural gas) must be done by a qualified person.

LP Gas Conversion

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

To Convert Gas Pressure Regulator

1.Ensure that the manual shutoff valve is in the closed position.

A

C

B

A. Shutoff valve in “closed” position

B. Gas supply line

C. To range

2.Unplug or disconnect power.

3.Open broiler door and remove broiler pan. The gas pressure regulator is located in the back right hand corner of the broiler compartment.

A

A. Gas pressure regulator

IMPORTANT: Do not remove the gas pressure regulator.

NOTE: Do not remove the spring beneath the cap.

4.Remove the cap from the gas pressure regulator using a flat- blade screwdriver.

5.Turn the cap over so that LP is visible.

A

A. Cap

6.Reinstall the cap.

To Convert Surface Burners

1.Remove burner grate, burner caps, and burners.

A

B

A. Burner cap

B. Burner

12

Image 12
Contents Installation Instructions 30 76.2 CM Freestanding GAS Range W10130752ARange Safety Table of ContentsWhat to do if YOU Smell GAS Installation Requirements Tools and PartsLocation Requirements Product Dimensions Installation Clearances 18 45.7 cm min. clearance upper side cabinet toElectrical Requirements Gas Supply RequirementsType of Gas Gas Supply LineGas Supply Pressure Testing Burner Input RequirementsGas Pressure Regulator Installation Instructions Install Anti-Tip BracketUnpack Range Verify Anti-Tip Bracket Location Level RangeMake Gas Connection Typical rigid pipe connectionIf the low flame needs adjusting Check OperationElectronic Ignition System Check Operation of Cooktop BurnersComplete Installation If the flame needs adjustingCheck Operation of Oven/Broil Burner If range does not operate, check the followingGAS Conversions LP Gas ConversionTo Convert Gas Pressure Regulator To Convert Surface BurnersComplete Conversion To Convert Oven BurnerNatural Gas Conversion Install natural gas orifice spuds Whirlpool Corporation All rights reserved 03/2007

W10130752A specifications

The Whirlpool W10130752A is a versatile and innovative appliance designed to enhance the efficiency and functionality of modern kitchens. As a refrigerator water filter, it plays a critical role in providing clean and safe drinking water by effectively reducing harmful contaminants.

One of the standout features of the W10130752A is its advanced filtration technology. This water filter utilizes a unique activated carbon block to significantly reduce chlorine taste and odor, alongside removing particulates and sediments. By providing improved water quality, it ensures that every glass of water and ice is fresh and pleasant. Additionally, its effective filtration system complies with various environmental standards, assuring consumers of its reliability and safety.

Another notable characteristic of the Whirlpool W10130752A is its compatibility with a wide range of Whirlpool refrigerator models. This universality simplifies the replacement process, allowing users to easily find a suitable filter for their specific appliance. Installation is straightforward and typically requires no tools, making it a user-friendly choice for homeowners.

The filter is also designed with an impressive lifespan. It typically lasts for six months or approximately 200 gallons of water, providing cost-effective and long-lasting service for families and individuals alike. Regular replacement is necessary to maintain optimal performance, and the filter conveniently features a built-in reminder that alerts users when a replacement is due.

In terms of overall efficiency, the Whirlpool W10130752A not only ensures cleaner drinking water but also contributes to enhancing the longevity of the refrigerator by preventing buildup of contaminants that could affect its internal components. This thoughtful design caters to consumer convenience, emphasizing the brand's commitment to quality and client satisfaction.

In conclusion, the Whirlpool W10130752A stands out due to its comprehensive filtration capabilities, ease of installation, compatibility with various models, and user-friendly reminders for replacement. It exemplifies the brand's dedication to enhancing everyday life through dependable appliances that prioritize health and convenience in the home. Investing in this water filter guarantees cleaner, fresher water, making it an essential component of any modern kitchen.