Complete Conversion, To Convert Oven Burner

2.Locate LP gas orifice spuds for top burners in the bag con- taining literature included with the range. Three LP gas spuds are stamped “88” and one “96.”

3.Remove natural gas orifice spuds using a 7mm combination wrench.

4.Install LP gas orifice spuds.

NOTE: Depending on model, the range cooktop may be equipped with 4 standard burners or 3 standard burners and 1 power burner. Spud size/location remain the same.

A.Spud

B.Holder

Std burner 88	Std burner 88
Power burner 96	Std burner 88

To Convert Oven Burner

1.Open oven door and remove oven racks, oven tray, flame spreader and set aside.

2.Lift oven burner. The orifice spud is behind the oven burner air shutter.

A. Air shutter

3.Locate LP gas orifice spud stamped “56” in literature package supplied with range.

4.Use a ³⁄₈" combination wrench and remove the natural gas orifice spud.

5.Install the number “56” LP gas spud.

A. LP oven orifice spud stamped with “56”

IMPORTANT: Do not over tighten.

6.Place natural gas oven burner spud in plastic parts bag along with natural gas cooktop burner spuds for future use and keep with bag containing literature.

7.Reinstall oven burner.

8.Reinstall oven racks, oven tray and flame spreader.

5.Place the natural gas orifice spuds in the parts bag for future use and keep with bag containing literature.

6.Reinstall burners, burner caps and burner grates.

Complete Conversion

1.Refer to the “Make Gas Connection” section for properly connecting the range to the gas supply.

2.Turn the manual shutoff valve in the gas supply line to the open position.

3.Refer to the “Check Operation” section for proper burner ignition, operation, and burner flame adjustments.

IMPORTANT: You may have to adjust the “LO” setting for each cooktop burner.

Checking for proper cooktop and oven burner flames is very important. The small inner cone should have a very distinct blue flame ¹⁄₄" to ¹⁄₂" (6.4 mm to 13 mm) long. The outer cone is not as distinct as the inner cone. LP gas flames have a slightly yellow tip.

4.Close the broiler door and turn the knob to “OFF”.

5.Refer to the “Complete Installation” section to complete this procedure.

W10130752A specifications

The Whirlpool W10130752A is a versatile and innovative appliance designed to enhance the efficiency and functionality of modern kitchens. As a refrigerator water filter, it plays a critical role in providing clean and safe drinking water by effectively reducing harmful contaminants.

One of the standout features of the W10130752A is its advanced filtration technology. This water filter utilizes a unique activated carbon block to significantly reduce chlorine taste and odor, alongside removing particulates and sediments. By providing improved water quality, it ensures that every glass of water and ice is fresh and pleasant. Additionally, its effective filtration system complies with various environmental standards, assuring consumers of its reliability and safety.

Another notable characteristic of the Whirlpool W10130752A is its compatibility with a wide range of Whirlpool refrigerator models. This universality simplifies the replacement process, allowing users to easily find a suitable filter for their specific appliance. Installation is straightforward and typically requires no tools, making it a user-friendly choice for homeowners.

The filter is also designed with an impressive lifespan. It typically lasts for six months or approximately 200 gallons of water, providing cost-effective and long-lasting service for families and individuals alike. Regular replacement is necessary to maintain optimal performance, and the filter conveniently features a built-in reminder that alerts users when a replacement is due.

In terms of overall efficiency, the Whirlpool W10130752A not only ensures cleaner drinking water but also contributes to enhancing the longevity of the refrigerator by preventing buildup of contaminants that could affect its internal components. This thoughtful design caters to consumer convenience, emphasizing the brand's commitment to quality and client satisfaction.

In conclusion, the Whirlpool W10130752A stands out due to its comprehensive filtration capabilities, ease of installation, compatibility with various models, and user-friendly reminders for replacement. It exemplifies the brand's dedication to enhancing everyday life through dependable appliances that prioritize health and convenience in the home. Investing in this water filter guarantees cleaner, fresher water, making it an essential component of any modern kitchen.