Front view of cabinet cutout
Product Dimensions
B
C
D
E
C
A
F
C
A
J
GBD E F
I
A. 30³⁄₄" (78.1 cm) recessed height from underside of cooktop to support slats
B. 28³⁄₈" (72.1 cm) cooktop recessed width
C. 28⁵⁄₃₂" (71.2 cm) range recessed width
D. 24¹³⁄₃₂" (58.4 cm) to back of range
H
E. 21" (53.3 cm) cooktop depth
F.31¹¹⁄₁₆" (61.1 cm) overall height
G.Model/serial number plate
H.30" (76.2 cm) overall width
I.31¹⁄₂" (80.0 cm) overall cooktop width
J. Shipping foot (temporary)
A. Top of countertop must be level across front, and front to back.
B. Locate electrical junction box on rear wall. Bottom of junction box should be 30¾" (78.1 cm) max. from top of countertop.
C. 28½" (72.4 cm) min. opening width
29³⁄₈" (74.6 cm) opening is recommended if available
D. ⁷⁄₈" (1.9 cm) min. required between cutout and cabinet door or hinge
E. 30³⁄₄" (78.1 cm) top of countertop to bottom of front cabinet cutout/ support slats
F. 36" (91.4 cm) overall countertop height
Side view of cabinet cutout
C
Cabinet Dimensions
Top view of cabinet cutout
A
B
C
D
A. 1¹⁄₂" (3.8 cm) max. countertop thickness B. ¹⁄₄" (0.6 cm) radius both corners
C. 30³⁄₄" (78.1 cm) top of countertop to support slats D. 3¹⁄₂" (8.9 cm) wide support slat on each side*
*Slats must be level front to back, as well as with each other.
D
B |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| E |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| G |
|
|
|
|
| |
|
|
|
|
| |||||
A | H |
|
|
| F | ||||
|
|
|
|
|
| ||||
A. Floor |
| E. | 1¹⁄₈" (2.9 cm) max. | ||||||
B. Wall |
| F. | Cabinet front | ||||||
C. 13" (33.0 cm) max. upper |
| G. | 19⁵⁄₈" (49.8 cm) | ||||||
cabinet depth |
| H. 25" (63.5 cm) countertop depth | |||||||
D. For minimum clearances to |
|
| 24" (61.0cm) lower cabinet depth | ||||||
top of cooktop, see NOTE* |
|
|
|
|
|
|
|
| |
*NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is protected by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.
3