3.Remove the light bulb from its socket. Replace with a
appliance bulb.
4.Replace bulb cover, retainer, seal and top screws. Tighten screws. Turn the power back on at the main power supply.
I | CAUTION: The bulb cover must be in place when using the oven. The cover | I |
| protects the bulb horn breaklng. |
|
NOTE: The Oven light will not work during the
If you need service or assistance,
we suggest you follow these five steps:
1.Before calling for assistance...
Performance problems often result from little things you can fix yourself without tools of any kind.
If nothlng operates:
l Is the range properly connected to gas and electrical supplies? (See “Installation Instructions:‘)
l Have you checked the main fuse or circuit breaker box?
l Is the flow of combustion and/or ventilation air to the range blocked? Do not block the air flow to and around the range.
If the oven will not operate:
l Is the Oven Selector turned to a setting (BAKE or BROIL, but not TIMED BAKE)?
l Is the Oven Temperature Control turned to a temperature setting?
If burner falls to Ilght:
l Is the range connected to elec- trical power?
l Have you checked the main fuse or 22circuit breaker box?
l Are burner ports clogged? (See page20.)
If burner flames are uneven:
l Are burner ports clogged? (See page20.)
If burner flames Ilfl off ports, are yellow, or are noisy when turned off:
l The air/gas mixture may be incor- rect. (Call for service.)
If burner makes a popplng noise when ON:
l Is the burner wet from washing? Let dry.
If control knob(s) will not turn:
l Did you push in before trying to turn?
If the SelfCleanIng Cycle will not operate:
l Is the Oven Selector set on CLEAN and the Oven Temperature Control set on OFF?
l Does the Start Time Dial show the correct time of day?
lIs the StopTimeDialsetahead
to the time you want the cleaning cycle to stop?