Whirlpool SES370X warranty Oven light, Part, What to USE, HOW to Clean, To replace the oven light

Page 10

PART

Broiler pan and grid

Oven racks

Oven door glass

Self-Cleaning oven

WHAT TO USE

Warm, soapy water or a soapy steel wool pad.

Use Self-Cleaning cycle. Warm, soapy water or soapy steel wool pads.

Spray glass cleaner or warm, soapy water and a non- abrasive plastic scouring pad.

For areas outside the Self- Cleaning area use warm soapy water or soapy steel wool pads.

HOW TO CLEAN

n Clean after each use.

n Wash, rinse and dry well.

n Do not clean in the Self-Cleaning Oven. (See note on page 8.1

n Leave in oven during Self-Cleaning cycle.

. Wash, rinse and dry well. Use soapy steel wool pads for heavily-soiled areas.

NOTE: The oven racks will discolor and be harder to slide when left in the oven during the Self-Cleaning cycle. If you want them to stay shiny, remove from the oven and clean by hand. If racks are left in the oven during the Self-Cleaning cycle, apply a small amount of vegetable oil to the sides of the racks to make them easier to slide.

. Make sure oven is cool.

. Follow directions provided with the cleaner.

. Wash, rinse and dry well.

. Follow directions started on page 8, “Usingthe Self- Cleaning cycle.”

. Do not use commercial oven cleaners.

. Do not use foil to line the bottom of your Self- Cleaning oven.

The oven light

The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel. Push the switch again to turn off the light.

To replace the oven light:

Electrical Shock And Personal

Injury Hazard

. Make sure oven and light bulb are cool and power to the oven has been turned off before replacing the light bulb. Failure to do so could result in electrical shock or bums.

. The bulb cover must be in place when using the oven. The cover protects the bulb from breaking, and from high oven temperatures. Since bulb cover is made of glass, be careful not to drop it. Broken glass could cause injury.

1.Turn off power at the main power supply.

2.Remove the glass bulb cover in the back of the oven by screwing it out counterclockwise.

3.Remove the light bulb from its socket. Replace with a 40-watt appliance bulb.

4.Replace the bulb cover by screwing it in clockwise. Turn on power at the main power supply.

NOTE: Make sure oven light is off during the Self-Cleaning cycle. Keeping oven light on will shorten bulb life.

Page 10

Image 10
Contents Contents Electric RangeImportant Safety Instructions Parts 81Features Model SES370XSetting the electronic clock Using Your RangeUsing the surface units Setting the electronic Minute TimerUsing the Cook Timer Using the ovenBaking Optional backguard accessory Storage drawerControl knobs Caring For Your RangeLift-up cooktop Control panelAt the end of the Self-Cleaning cycle Using the Self-Cleaning cycleTo start the Self-Cleaning cycle later Before you startCleaning chart PartPart HOW to CleanOven light What to USEReplace fuse or reset circuit breaker Before You Call For ServiceOperating Problem Check ifFrom date of purchase