The following chart suggests broiling times and
to BROIL. |
| Inches | (cm) | from |
| |
|
| top | of | food | Approximate | |
|
| to | Broil |
| Minutes | |
Food | Description | Element |
| 1st side | 2nd side |
ALWAYS broil with the door open about 4 inches (10 cm).
I @5cm!
1” I2 5 cm) 1” i2 5 cm)
1’.‘(4cml I’., (4cm) I’., 14cml (2 Ilcml
; .I\‘t’r
3” | I8 cm1 |
| ||
3” | I8 cm1 |
| ||
3” | (8 cm I |
| ||
| ||||
| ||||
cm) | ||||
3” | 18 cm) |
| ||
2” | (8 cm) |
| ||
3” | (S cm) |
| ||
:i’ | (Semi |
| 6 | 4 |
| 15 | 10 | ||
7’ | ~9” [ | cm) | ||
3 | (8cmJ |
| ||
3” | (8 cm) |
| ||
3” | iX cm) |
| 3 | 3 |
|
loosen the Locking Screw
Lower: move black part toward “LO.”
One notch equals about
10°F (5%).
Higher: move black part toward “HI.”
One notch equals about
10°F (5 C).
Variable Broil Feature:
You might want to broil some foods slower than others. Broiling can be slowed down by setting a lower temperature on the Oven Temper- ature Control Knob Instead of “BROIL.” Using a lower temperature will cause the broil element to turn on and off during the broiling so that the food broils more slowly.
When the Oven Temperature Control Knob is on “BROIL.” the Broil Element heats all the time. Set the temperature lower and it heats some of the time The lower the temperature setting, the shorter are the periods of heating.
NOTE: The Oven Selector must be in the “BROIL” position in order for the Broil Element to heat.
Resetting the oven temperature control:
Does your new oven seem hotter or colder than your old oven? The temperatures in older ovens often shift very gradually, getting hotter or colder without the user really noticing the change. Your new oven is properly adjusted to provide accurate temperatures, but when compared to your old range. the new design may give you different baking results. If you think that the temperature setting on your range needs to be hotter or colder. you can adjust the Oven Temperature Control Knob by yourself.
To adjust the setting, first pull the Oven Temperature Control Knob straight off. On the back. just across from the locking screw. are a row of notches on the black part of the knob and one tooth on the chrome part.
To set your o\ren about 10 F(5’C) cooler. loosen the locking screw about two full turn< and move the row of notches one notch closer to “LO ‘. To set your oven about
Tighten the locking screw and put the knob back on the
(xntrol panel
5