Caring For Your Range
Continued
Ven\cover
Filler
1.Remove the vent cover and wash in warm, soapy water or wipe with a damp cloth. Do not use metal scrubbing pads or abrasive cleansers.
Lift up vent filter, which is directly below vent cover. Wash in warm, soapy water or dishwasher.
Wipe in and around the vent box with a damp cloth. Spills should be cleaned up with a sponge.
Replace the filter. Be sure the filter is replaced flat and rests on side edges of trim. Filter should not be replaced at an angle.
5. Replace the vent cover.
NOTE: Filter must be in olace for the fan to operate properly. Replacement filters can be ordered from a WhirlpoolSM service company or dealer. Order Part Number 786220 (one pair).
In the event you are unable to obtain the name of a local authorized Whirlpool service company, call Whirlpool
Under normal use, the vent fan requires no oiling for the first year. After the first year, oil every three months with SAE 20 oil.
28