AMX DAS-AMFM instruction

Single Tuner Installation Instructions

FIG. 1 Rear Panel Tuner with Tuner Option cover plate

FIG. 3 Tuner 1 Module Connection

FIG. 4 20-Pin Connector and Ribbon Cable

FIG. 5 Controller Jumper Configuration

DAS-AMFM specifications

Installation Guide

DAS-AMFMAM/FM Tuner Module

Overview

Installing The Tuner Module in the Controller

Tuner 1 (installed)

Tuner Option cover plate

Rear of controller

Tuner 1 Connector

Setting the Jumpers in the Controller

Add AM/FM Radio functionality to your Mi Series system with the DAS-AMFM AM/FM Tuner Module (FG1110-01).

•Up to two DAS-AMFM modules can be added to each Mi Series controller.

•Each tuner module uses one source input on the audio controller.

WARNING: Disconnect all power sources before opening the chassis. Fail- ure to disconnect power before performing this installation may cause injury or death.

CAUTION: Make sure to discharge all static electricity from your body before touching any components of the tuner modules or the audio control- ler. Failure to do so may lead to permanent damage to the tuner or controller.

1.Remove the cover from the controller.

2.With the back of the unit facing you, remove the screws from the Tuner Option cover plate at the right top corner of the rear panel (FIG. 1) and remove the plate. Retain the screws, as they will be used to install the tuner.

3.Carefully insert the DAS-AMFM tuner module into the controller, with the electronics facing up, and use the screws that attached the Tuner Option cover plate to secure the tuner to the controller.

Note: Be careful not to damage the white ribbon cable on the top of the Tuner module.

4.Place the Rear Panel connector at the end of the ribbon cable (FIG. 2) on the rear board pin-bus, keeping the red stripe at the top.


RED STRIPE (to Pin 1)		not used

5.Connect the "Tuner 1" connector on the ribbon cable to the Tuner 1 module (FIG. 3).

Note: The ribbon cable must be oriented so that the red stripe is con- nected to Pin 1 on the connector.

•Be sure that both ends of the cable are securely plugged into their respective boards through the 20-pin connectors (FIG. 4).

Examine the configuration of the jumpers on the left end of the rear board, as seen when viewing the rear board from the front of the controller.

The jumpers should be in the “Off” position, with the top pair of pins in each configuration exposed and the jumpers connecting the second and third set of pins.

Move the top set of jumpers to the “On” position, connecting the first two sets of pins and leaving the third set exposed (FIG. 5).

Tuner 1 jumpers (in “On” position)

Exposed pair of pins

Tuner 2 jumpers (in “Off” position)

•Reconnect power to the unit and turn it on to make sure that the tuner is properly integrated with the controller.

•If the tuner is functioning properly, remove power and replace the unit cover.

Rear Panel

Rear Panel

FIG. 2 Tuner Ribbon Cable

The AMX DAS-AMFM is a state-of-the-art communication system designed to enhance information dissemination and operational efficiency across various sectors. With a unique combination of advanced technologies, the DAS-AMFM is poised to transform the way organizations manage and distribute critical information.

One of the standout features of the DAS-AMFM is its versatility. This system can handle both digital and analog communication, offering a seamless transition between different formats. This flexibility ensures that users can communicate effectively, regardless of the existing infrastructure or technology in use. The DAS-AMFM supports multiple frequency bands, allowing it to operate in a wide range of environments, from urban cities to remote locations.

The heart of the DAS-AMFM is its robust digital signal processing capabilities. This technology enables the system to filter and enhance audio signals, resulting in high-quality sound clarity during communication. The integrated noise reduction algorithms work to minimize background interference, making conversations more intelligible even in loud environments. This feature is especially beneficial in mission-critical settings where clear communication can mean the difference between success and failure.

Another key characteristic of the DAS-AMFM is its user-friendly interface. The system is designed with an intuitive layout that allows users to navigate easily between functionalities. Enhanced display features provide real-time information on system status and communication metrics, empowering users to make informed decisions quickly. Furthermore, the DAS-AMFM supports multiple user profiles, allowing for customized functionalities based on specific user needs or organizational protocols.

Security is also a priority for the DAS-AMFM, which incorporates advanced encryption techniques to protect sensitive communication. This ensures that data transmitted over the system remains confidential and secure from unauthorized access. Additionally, the system can be integrated with existing security protocols, enhancing an organization’s overall information security framework.

In terms of deployment, the DAS-AMFM is designed for ease of installation and maintenance. Its modular architecture allows for rapid expansion and scalability to accommodate growing communication needs. The system can be deployed in various configurations, tailored to specific operational requirements, making it a versatile choice for different organizations.

In summary, the AMX DAS-AMFM stands out for its robust feature set, including digital and analog communication capabilities, exceptional audio clarity, user-friendly interface, enhanced security measures, and easy scalability. This innovative system is well-equipped to meet the evolving demands of modern communication challenges across a wide range of sectors.