Troubleshooting

To Replace:

1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

2.Hold oven door so that the top edge of each door slot is horizontal. Insert door hinge into the hinge slots.

3.Tilt top of door toward range. Insert bottom door hinge notch down onto front frame edge.

4.Open the door completely and remove the hinge pins. Save hinge pins for future use.

5.Close the door slowly to assure door side panel clearance and proper hinge engagement.

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

■Is the power outlet properly wired and polarized?

Try another outlet to check for proper wiring and polarity.

■Is the power supply cord unplugged? Plug into a properly grounded 3 prong outlet.

■Has a household fuse been blown or has the circuit breaker been tripped?

Replace the fuse or reset the circuit.

■Is the main or regulator gas shutoff valve in the off position?

See Installation Instructions.

■Is the range properly connected to the gas supply? Contact a trained repair specialist or see Installation Instructions.

Surface burners will not operate

■Is this the first time the surface burners have been used? Turn on any one of the surface burner knobs to release air from the gas lines.

■Is the control knob set correctly? Push in knob before turning to a setting.

■Are the burner ports clogged?

On sealed burner models, see “Sealed Surface Burners” section.

On open burner models, see “Surface Burners” section.

■Is the pilot light out?

Light the surface burner pilots. (See “Pilot Lights” section.)

Surface burner flames are uneven, yellow and/or noisy

■Are the burner ports clogged?

On sealed burner models, see “Sealed Surface Burners” section.

On open burner models, see “Surface Burners” section.

■On models with caps, are the burner caps positioned properly?

See “Sealed Surface Burners” section.

■Is the burner damaged?

On models with caps, look for warped cap. Place cap, flat side-down, on a flat surface. If cap wobbles noticably, it is warped. Place cap on different burner for further check of warping. Replace warped cap. Contact a trained repair specialist if the condition does not improve.

■Is the air/gas mixture correct?

Contact a designated service technician to check the air/gas mixture, or see the Installation Instructions.

■Is propane gas being used?

The appliance may have been converted improperly. Contact a trained repair specialist.

Surface burner makes popping noises

■Is the burner wet? Let it dry.

Cookware not level on cooktop

■Is the range level?

Level the range. (See the Installation Instructions.)

■Is the proper cookware being used?

Use cookware with a flat bottom. (See “Cookware” section.)

Excessive heat around cookware on cooktop

■Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than 1 in. (2.5 cm) outside the cooking area.

Oven will not operate

■Is the power outlet properly wired and polarized?

Try another outlet to check for proper wiring and polarity.

■Is this the first time the oven has been used?

Turn any one of the surface burner knobs on to release air from the gas lines.

■Is the oven temperature control knob set correctly? See “Cooktop/Oven Temperature Controls” section.

■Is the main or regulator gas shutoff in the off position? Contact a designated service technician or see the Installation Instructions.

FGP325K0, FGP300K0, FGP305K0, FGP337K0 specifications

Whirlpool has long been recognized for its commitment to quality and innovation in kitchen appliances. Among its impressive lineup, models like the FGP337K0, FGP305K0, FGP300K0, and FGP325K0 stand out as reliable options for home cooks and culinary enthusiasts alike. Each of these models presents a blend of functionality, design, and advanced technology, making them valuable additions to any kitchen.

The FGP337K0 is notable for its spacious oven capacity and efficient heating. It comes equipped with a convection feature, which ensures even cooking by circulating hot air throughout the oven. This is ideal for baking, as it reduces cooking times and improves results. Additionally, the model boasts multiple burners, including a powerful high-heat burner for quick boiling and a simmer burner for delicate sauces and creams.

Similarly, the FGP305K0 model emphasizes user-friendly features, with easy-to-use controls that allow cooks to adjust heat settings precisely. It includes an integrated clock and timer function, helping home chefs keep track of cooking times effectively. With a sleek stainless-steel finish, this model also adds a modern touch to any kitchen decor, while being easy to clean and maintain.

The FGP300K0 focuses on energy efficiency without compromising performance. With its reliable ignition system and adjustable flame settings, this model is perfect for both quick meals and complex recipes. The surface is designed for easy cleanup, with seamless edges that help prevent spills from reaching hard-to-clean areas.

Finally, the FGP325K0 is a versatile choice with advanced technology features, including automatic ignition and safety locks on the burners, which enhance the safety of your cooking experience. This model is equipped with a dedicated griddle burner, offering the perfect surface for cooking breakfast favorites like pancakes and bacon simultaneously.

Overall, these Whirlpool models, FGP337K0, FGP305K0, FGP300K0, and FGP325K0, cater to a variety of cooking needs. They combine reliability, efficiency, and modern design, making them suitable for both beginners and expert chefs. With Whirlpool, users can expect a seamless cooking experience backed by innovative technologies that facilitate meal preparation and cooking excellence in the kitchen.