3.Pull the surface unit straight away from the receptacle.
4.Lii out the reflector bowl. On Model RF365PXY, Q series, also lift out the trim ring. See “Cleaning chart” on page 25 for cleaning instructions.
Replacing
1.Make sure all surface units are off and cool before replacing surface units and reflector bowls.
2.Line up openings in the reflector bowl and (Model RF365PXY. Q series) notches in the trim ring with the surface unit receptacle and the element
(Modd RP365PXY, Q solos, shown)
‘b
9
(Model RF365PXY, Q series, shown)
23