Whirlpool RF360BXW Using the Surface Units, Surface Unit Markers, Surface Unit Indicator lights

Using your range

Using the Surface Units

Surface Unit Markers

The solid dot in the surface unit marker shows which surface unit is turned on by that knob.

Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.

Surface Unit

Indicator lights

One of the surface unit indicator lights on the control panel will glow when a surface unit is on.

Burn and Fire Hazard Be sure all control knobs are turned to OFF and all indicator lights are OFF when you are not cooking. Someone could be burned or a fire could start if a surface unit is accidentally

left ON.

Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.

Use HI to start		Use MED-HI		Use MED		Use MED-LO		Use LO to
foods	cook-	to hold	a	for gravy,		to keep	food	keep	food
ing; to bring		rapid	boil; to	puddings		cooking	after	warm	until
liquids	to a	fry chicken		and	icing; to	starting	it	ready	to
boil.		or pancakes.		cook	large	on a higher		serve. Set the
				amounts of		setting.		heat	higher
				vegetables.				or lower
								within	the LO
								band	to keep
								food	at the
								temperature
								you want.