Cornelius UC 700 Series manual Pre-Installation

Page 10

INSTALLATION

PRE–INSTALLATION

Freight Damage Claim

The delivery of your equipment (Frieght Company, Distributor, or dealer) is responsible for loss or damage of your shipment. All claims must be filed with the deliverer of your equipment. Please follow the steps below to determine if your shipment is satisfactory or if a claim must be filed:

1.Check the number of products delivered against the number of products listed on the delivery receipt. Should the totals not match, have the driver note all errors on both copies and both you and the driver sign and date said notation.

2.Inspect all cartons for visible damage. Open and inspect as required before the driver leaves and have him or her note any damage on the receipts. All damaged claims must be inspected within 15 days of delivery. Notify your carrier immediately if concealed damage is found after delivery.

3.Should concealed damage be found when the product is unpacked, retain the packing material and the product and request an inspection from the deliverer.

4.All claims for loss or damage should be filed at once. Delays in filing will reduce the chance of achieving a satisfactory resolution to the claim.

Counter

1.A flat and level counter space sufficiently strong to support the weight of the Dispenser and the Icemaker. The Icemaker may be installed on the left or the right side of the Dispenser.

2.General Requirements:

A.The front of the Icemaker must be free of obstructions.

B.Allow a 4–inch minimum clearance between exaust side of the Icemaker and adjacent equipment.

C.A louvered front panel (12–inches X 12–inches) aligned with the air inlet of the Icemaker and ade- quate ventilation (1.5 Sq. feet opening) in the counter for exaust air.

D.A removable panel in the counter face (from 2–inches below the top of the counter to the floor, a mini- mum of 17–inches wide) to allow removal of the Icemaker.

Electrical

Two separate 20 amp, 120VAC, 60 Hz electrical circuits.

Drain

One drain beneath the counter at floor level which will accomodate both the drain from the Icemaker and the Dispenser.

7

630460127

Image 10
Contents UC 700 Series CONTINUOUS-FLOW Icemaker Table of Contents Table of Contents cont’d Understand Signal Words Safety InformationRecognize Safety Information Follow Safety InstructionsThis page Left Blank Intentionally Description General DescriptionTo the User of this Manual Claims InstructionsSpecification Chart Design Data cont’dClearance Requirements This page Left Blank Intentionally Installation PRE-INSTALLATIONInstallation Side Bracket InstallationInitial Start UP, Checks and Adjustment Instructions Icemaker Float AssemblyThis page Left Blank Intentionally Maintenance Guide to ServiceIcemaker Cleaning and Sanitizing Procedures MonthlyHow Water Level Control Works Water Level ControlSemi-Annually PurposeRefrigeration System Refrigeration System AdjustmentsTo Replace Water Level Safety Switch To Replace Water Level ControlExpansion Valve Adjustment and TroubleshootingCondenser Modulating Valve Condenser Modulating Valve Removal BIN ControlGearmotor Motor CheckTo Replace Gearmotor Assembly Start RelayAuger and Extruding Head Removal Upper NUT and Bearing AssemblyTo Replace Bearing Electrical Checkout Capacitor CheckSafety Controls Gear Motor OverloadGuide to Good ICE Wiring Diagram Troubleshooting Chart Icemaker not Operating Troubleshooting Troubleshooting CompressorsParts List Panel Components NameICE Chute Components Compressor Components Evaporator Components Certificate of Warranty IMI CorneliusThis page Left Blank Intentionally IMI Cornelius INC