TROUBLESHOOTING GUIDE
Should your unit fail to operate properly, check that there is power to the unit and that the hopper contains ice. If the unit does not dispense, check the following chart under the appropriate symptoms to aid in locating thede- fect.
Trouble |
| Probable Cause |
BLOWN FUSE OR CIRCUIT BREAKER | A. | Short circuit in wiring. |
| B. | Defective gate solenoid. |
| C. | Defective agitator motor. |
|
|
|
GATE DOES NOT OPEN AGITATOR DOES | A. | No power. |
NOT TURN. |
|
|
| B. Bent depressor plate (does not actuate switch). | |
| C. | Defective dispensing switch. |
|
|
|
GATE DOES NOT OPEN OR IS SLUGGISH. | A. | Defective gate solenoid. |
AGITATOR TURNS. |
|
|
B.Weak gate spring
C.Excessive pressure against gate slide.
GATE OPENS. AGITATOR DOES NOT TURN. A. Ice solidified in hopper.
| B. | Defective agitator motor. |
| C. | Defective capacitor. |
|
|
|
ICE DISPENSES CONTINUOUSLY. | A. | Stuck or bent depressor plate (does not release |
|
| switch). |
| B. | Defective dispensing switch. |
| C. | Improper switch installation. |
|
|
|
SLUSHY ICE. WATER IN HOPPER. | A. | Blocked drain. |
| B. | Unit not level. |
| C. Poor ice quality due to water quality or icemaker | |
|
| problems |
7 | 91875 |