Refrigeration System Adjustments

Countertop Icemaker IMD Series Installation Manual

The operating positions of the switch are fixed, no adjustments are necessary. If switch replacement becomes necessary, simply disconnect cable at connector, remove wires from switch.

Temperature/Pressure Charts*

10 lbs. Discharge Pressure

Water Temperature

Air Temperature

		IMD300-15			IMD300-30		IMD600-30 & IMD600-90
50o	40o	65o	90o	40o	65o	90o	40o	65o	90o
50o	80	85	90	162	166	168	174	177	180
60o	92	97	102	188	192	194	202	205	208
70o	114	120	124	214	218	220	230	233	236
80o	124	120	147	245	249	251	265	269	272
90o	161	167	171	275	279	281	300	304	307
100o	187	193	195	309	313	315	328	334	340

NOTE: The thermostatic expansion valve is non-adjustable on all models.

A complete understanding of the icemaker and hermetic refrigeration system is necessary before any adjustments are made. The refrigeration technician must use high and low side pressure readings, water, and air temperatures, plus general conditions of cleanliness to assess the refrigeration system sta- tus when making any adjustments.

All icemaker products are tested and adjusted at the factory prior to shipment where the ambient temper- ature ranges from 65oF to 90oF, depending on the season of the year.

Whenever a new icemaker is initally installed and started-up, it is imperative that the start-up operator make the following checks and readjustments for local conditions.

EXPANSION VALVE

You will find a thermal expansion valve on icemakers, which is used to control the amount of refrigerant flowing through the evaporator. Improperly installed or defective expansion valves may cause low pro- duction, soft ice, squeaking from evaporator and excessive load inside evaporator.

By using general refrigeration troubleshooting along with the pressure charts, you can easily determine whether or not the expansion valve is working properly.

ADJUSTMENT AND TROUBLESHOOTING

When troubleshooting the expansion valve, you must:

1.Be sure you have adequate water flowing into the evaporator, a clean and properly ventilated con- denser, and the system is properly charged and free of any restrictions. Also be sure compressor is operating properly.

2.Take reservoir water temperature and air temperature from condenser inlet and determine at what pressure unit should be running. On machines equipped with thermostatic valve there is NO adjust- ment. If correct pressure cannot be obtained, be sure system has time to stabilize, 10-15 minutes.

3.Be sure sensing bulb is located at outlet side of evaporator about 3-4 inches away from evaporator and be sure to insulate well and clamp tightly to tubing. If system pressures are still not adequate, take a second water and air temperature reading and go over other parts of the system for possible problems. If proper charge is questionable evacuate and recharge to nameplate and leak check. If valve still malfunctions replace valve.

Use general refrigeration system practices when replacing and recharging unit. After new valve is in place, go through previous monitored adjustments and troubleshooting to be sure valve is functioning properly.

Publication Number: 638085277INS

- 10 -

IMD Series specifications

The Cornelius IMD (Intelligent Dispensing) Series represents a cutting-edge advancement in beverage dispensing technology, making it ideal for a wide array of establishments, including restaurants, cafeterias, and bars. This innovative series is designed to provide ultimate flexibility in drink variety while enhancing efficiency and reducing operational costs.

One of the standout features of the Cornelius IMD Series is its advanced touchscreen interface. This user-friendly screen allows operators to navigate through beverage selections easily. Customizable menus enable businesses to showcase their unique drink offerings prominently. The interface can also be programmed to highlight promotions or new items, ensuring customers are always informed about their options.

In addition to the intuitive interface, the Cornelius IMD Series employs state-of-the-art digital metering technology. This ensures precise control of beverage portions, drastically reducing waste and ensuring consistent drink quality. The technology also allows for real-time tracking of beverage usage, providing valuable insights into inventory management and helping operators understand consumer preferences.

Another important characteristic of the IMD Series is its modular design. This allows operators to configure the unit to suit their specific needs, accommodating everything from carbonated beverages to cold brew coffee and even specialty cocktails. The modular nature also means that upgrades and maintenance can be performed with minimal disruption, keeping downtime to a minimum.

The Cornelius IMD Series is built with energy-efficient components, which is increasingly important in today’s environmentally conscious market. Its design minimizes energy consumption without sacrificing performance, supporting the push for more sustainable business practices.

Furthermore, the IMD Series integrates seamlessly with various payment systems, including cashless options, making transactions smooth and efficient. This integration not only enhances the customer experience but also streamlines the payment process for operators, improving overall service speed.

In conclusion, the Cornelius IMD Series is a versatile beverage dispensing solution that combines innovation, efficiency, and user-friendly design. With its advanced touchscreen interface, precise digital metering, modular construction, energy-efficient operation, and payment integration capabilities, it is poised to revolutionize how beverages are dispensed in various settings, meeting the demands of modern consumers and businesses alike.