Cornelius 322 manual Make Electrical Power Supply Connection, Make Plumbing Connections

Page 8

Diagram 2

MAKE ELECTRICAL POWER SUPPLY CONNECTION

Requirements: 115V/60 Hz 1 ph., 230V/60 Hz. 1 ph., or 220V/50 Hz. 1 ph when used.

Refer to serial plate for minimum circuit ampacity and maximum time delay fuse size.

All wiring must conform to national and local electrical codes.

MAKE PLUMBING CONNECTIONS

Water supply -- (install per local codes) (See diagram 3).

The water inlet connection to the unit is a 3/8”male flare connection located at the rear of the ice machine.

WARNING: If the water pressure exceeds 50 pounds, a water pressure regulator should be installed in the water inlet line between the water shut--off valve and the strainer.

Install a reducer fitting on the shut--off valve to accommodate the water stainer, which is supplied with each ice machine and MUST be used. This is very important for cleaning. Connect either 3/8”or 1/2”copper tubing be- tween the water inlet fitting of the ice machine and the water strainer.

For water cooled units

Two water inlet connections are provided. One for the ice making (evaporator) section which is located on the back of the machine and is a 3/8”flared connection. The other is for the water cooled condenser.

The reason for the separate water inlet connections is that some installations use a water tower for cooling the water used in the water cooled condenser and some installations use treated water (filtered) for the ice making inlet water connections. Be sure to install water line (incoming) to the 3/8”male flare connection on the back of the unit that supplies water to the water regulating valve inside. The setting of the water regulating valve from the factory should be 200 pounds for R--22 units. NOTE: Always flush out water lines before starting unit. Ad- justments, if necessary, should be done at installation.

3/17/95

5

166240008

Image 8
Contents Series ICE Cube Machine Table of Contents Table of Contents cont’d Recognize Safety Information Understand Signal WordsFollow Safety Instructions CO2 Carbon Dioxide WarningThis page Left Blank Intentionally Specifications UnpackingElectrical Plumbing ConnectionsUnit SET-UP LevelingUnit Location For water cooled units Make Electrical Power Supply ConnectionMake Plumbing Connections Water Level Reservoir Drain Connection Installation InstructionsDrain Starting the Unit Adjustment Procedure For Harvest Bin Switches Installation Instructions for Mounting on Drink DispensersCheckout Procedure For Harvest Bin Switches Sanitizing and Cleaning Procedure Winter Storage Cleaning the AIR Cooled Condenser CoilWater Treatment Average Operating Characteristics AIR Cooled Condenser 17/95 Dump Cycle ICE Production Check Adjusting Bridge ThicknessTotal ICE Capacity LED Indicators Status Indicator Pre-Chill ModeCircuit Board Diagnosis Reset Operation Test PlugSensors Voltage ChecksVoltage Selector Switch Sensor Thermistor DiagnosisThermostatic Expansion Valves SensorsWater Regulating Valve Starving TXV Product SymptomsFlooding TXV Product Symptoms Service Stem Valves Moisture ContaminationRelay Compressor & Starting Component CHECK-OUT ProcedureCompressor Contactor Capacitors CompressorLeak Detection System Evacuation & RechargingSELF-CONTAINED Products Refrigerant Definitions Ashrae High Pressure Safety Switch Condenser FAN Cycling ControlIMI Cornelius INC IMI Cornelius INC

322 specifications

Cornelius 322 represents a significant advancement in the field of technology, specifically within the realm of digital solutions designed to enhance productivity and efficiency in various industries. This innovative platform features a user-friendly interface, making it accessible to both tech-savvy individuals and those less familiar with modern digital tools.

One of the main features of Cornelius 322 is its robust data management capabilities. It allows users to seamlessly collect, store, and analyze large volumes of data in real-time. This is particularly valuable for businesses that rely on data-driven decision-making. The advanced analytics tools integrated into Cornelius 322 help users gain insights into their operations, customer behavior, and market trends, facilitating informed strategic choices.

Additionally, Cornelius 322 utilizes cutting-edge cloud technology, enabling users to access their data and applications from anywhere with an internet connection. This flexibility is crucial in today’s remote working environment, as it allows teams to collaborate effectively regardless of their physical location. The platform also ensures data security through encryption protocols and regular software updates, safeguarding sensitive information from unauthorized access.

Another key characteristic of Cornelius 322 is its integration capabilities. The platform is designed to work seamlessly with existing software and systems, making it easier for organizations to implement without overhauling their entire infrastructure. This interoperability is essential for businesses that wish to leverage their current investments while upgrading their technology.

The modular design of Cornelius 322 is a standout feature that allows users to customize the platform according to their specific needs. Organizations can select and implement only the components that are relevant to their operations, making the solution both adaptable and cost-effective. This level of customization empowers businesses to scale their technology solutions as they grow.

Furthermore, Cornelius 322 is equipped with machine learning algorithms that enhance its predictive capabilities. These algorithms analyze historical data to forecast future trends, assisting businesses in proactive planning and strategy development.

In summary, Cornelius 322 combines user-friendliness, robust data management, cloud accessibility, integration versatility, customization, and advanced analytics to provide a comprehensive solution for modern businesses. Its innovative technologies and characteristics make it a valuable tool for driving efficiency and growth in a rapidly evolving digital landscape.