Whirlpool GS445LEL, GS465LEL, GS470LEL, GS458LEL, GS440LEL, GS475LEL, GS460LEL Sequence Programming

Page 13

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time of day. See “Clock” section.

1.Press desired cook function.

Press the TEMP “up” or “down” arrow pads to enter a temperature other than the one displayed.

2.Press START TIME.

3.Press the HR and MIN “up” or “down” arrow pads to enter the time of day to start.

4.Press STOP TIME (optional).

5.If STOP TIME has been pressed, press the HR and MIN “up” or “down” arrow pads to enter the desired time to end cooking.

6.Press START.

“DELAY” will appear on the display.

When the start time is reached, the oven will automatically turn on.

When the stop time is reached (if programmed), the oven will shut off automatically and “End” will appear on the display.

End-of-cycle tones will sound; then, if on, reminder tones will sound every minute.

7.Open and close the oven door to clear the display and/or stop reminder tones.

Sequence Programming

(on some models)

Sequence Programming allows you to program at one time up to four cook functions, and is usable with other electronic oven control functions, such as the Timer and Warming Drawer.

Sequence Programming takes precedence over any non- sequenced cook function. For example, if an untimed Bake function is in process and a sequence program is started, the untimed Bake function will be canceled, and the program sequence will start.

All steps of a sequenced program must be programmed with a stop time. If a stop time is not entered for a step in the sequence program, and the FIRST/NEXT STEP pad is pressed, three tones will sound.

To Program the First Step of the Sequence:

1.Press FIRST/NEXT STEP.

“PROGRAM” and “STEP” will appear on the display. A flashing “1” will also appear on the display, indicating that step 1 is being programmed.

2.Choose the desired cook function by pressing any cook function key.

3.Press START TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to begin.

If START TIME is not pressed, then the sequence of cook functions will begin immediately once programming is complete and START is pressed.

The display will show either the time of day (if start time was not programmed) or the start time (if same was programmed), but with a flashing colon. “Stop” and “Time” will also appear on the display.

4.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to stop.

To Program Next Steps of the Sequence:

1.Press FIRST/NEXT STEP.

“PROGRAM” and “STEP” will appear on the display. The number of the steps being programmed will flash.

“START” and “TIME will appear on the display.

2.Choose the desired cook function by pressing any cook function key.

Press TEMP “up” or “down” arrow pad (if desired) to select temperature.

3.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to select stop time.

4.Press START to begin sequence.

5.Press CANCEL at any time to clear program and to stop program.

To Review/Modify Programmed Sequence:

If program steps are partially or completely programmed, yet the sequence has not been started, the programmed cook functions can be reviewed.

1.Press REVIEW STEPS. Step 1 will appear in the display

Subsequent presses of REVIEW STEPS will cause display of programmed steps in order.

“STEP” and “RECALL” will appear on the display. The number of the displayed step will flash. A recalled step will remain lit on the display for 5 minutes if no further action is taken.

2.If fewer than four steps have been programmed, press REVIEW STEPS repeatedly until the last programmed step is displayed, then press FIRST/NEXT STEP if it is desired to program an additional step.

While a step is recalled, a cook function pad can be used to change the function, or the TEMPERATURE “up” or “down” arrow pad can be used to change the set temperature.

START TIME, when used with the HR or MIN “up” or “down” arrow pads, can be used to change, add or delete a delayed start.

STOP TIME can be used to change the stop time. Changing the stop time of a step will automatically change the start times and stop times of all subsequent programmed cook functions.

3.After Review/Modification of the programmed sequence is complete, press START to begin sequence.

To Modify Sequence Programming:

1.Press UNDO.

The last step of the sequence will be canceled, and the step prior to the canceled sequence will show on the display for either review or modification.

If the programmed sequence has not been started, see “To Program Next Steps of the Sequence” section to program a step to replace the canceled cook function.

2.Press START.

The first step will show on the display and the program sequence will begin.

Changes can be made during a programmed cook function; however, changes cannot be made after a programmed cook function has been completed.

If at any time during an active sequenced program FIRST/ NEXT STEP is pressed, three tones will sound.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Use & Care Guide GAS Range8523777A Range Safety Table of ContentsWhat to do if YOU Smell GAS Anti-Tip BracketImportant Safety Instructions Control Panel Parts and FeaturesRange Cooktop USE Power failureCooktop Controls Surface BurnersCookware Characteristics To CleanHome Canning CookwareElectronic Oven Control Oven USE Bakeware SplitOven RackMeatThermometer RacksBaking and Roasting Oven VentChoice Bake Function BroilingTo Use Automatic Warm Hold Feature Warm Hold FeatureTimed Cooking To Custom BroilSequence Programming Warming Drawer Temperature Chart Warming Drawer SettingsSettings Temperatures Food SettingTo Stop Self-Clean any time Self-Cleaning CycleRange Care How the Cycle WorksOven Light General CleaningStorage Drawer Oven DoorBefore Removing To RemoveTroubleshooting Canada U.S.AWhirlpool Corporation will not pay for ONE-YEAR Full Warranty8523777A

GS445LEL, GS460LEL, GS475LEL, GS440LEL, GS458LEL specifications

The Whirlpool GS465LEL, GS470LEL, GS458LEL, GS440LEL, and GS475LEL are a series of premium gas ranges designed to enhance culinary experiences with their innovative features and cutting-edge technologies. These models are recognized for their durability, versatility, and user-friendly design, making them ideal for both novice cooks and seasoned chefs.

One of the key features across this series is the powerful gas burners. With a variety of burner options, including a high-output burner perfect for searing meats and a simmer burner for delicate sauces, these ranges deliver precise temperature control. The GS465LEL and GS470LEL, in particular, boast a professional-grade burner configuration, allowing for quick heating and consistent cooking results.

Each model also comes equipped with Whirlpool’s Even-Heat technology, ensuring that heat is evenly distributed throughout the oven. This innovation minimizes hot spots and helps in achieving perfect baking results, whether you are preparing pastries, casseroles, or roasts. The large capacity oven, which is standard in this range, accommodates multiple dishes at once, making it a convenient option for large families or entertaining guests.

The GS458LEL and GS440LEL include a self-cleaning feature that simplifies maintenance. This technology uses high heat to burn away food residue and spills, reducing the need for manual scrubbing. Additionally, the easy-to-use control panel and touchscreen interface make it simple to select cooking settings and monitor the progress of your meals.

Safety is a priority with these models. The GS475LEL includes an oven lock feature to prevent accidental openings during cooking, while the flame failure safety device ensures that the gas supply is cut off immediately if the flame is extinguished.

Moreover, the stylish design of each model is an attractive addition to any kitchen. The stainless steel finish is not only visually appealing but also easy to clean and resistant to fingerprints. With customizable options, users can select different knobs and handles to suit their design preferences.

In conclusion, the Whirlpool GS465LEL, GS470LEL, GS458LEL, GS440LEL, and GS475LEL are exceptional gas ranges that combine advanced cooking technologies with aesthetically pleasing designs. Their features cater to various cooking styles and preferences, ensuring that every meal is a delight to prepare and serve. These ranges stand as a testament to Whirlpool's commitment to quality, innovation, and user satisfaction in the kitchen.
Top Page Image Contents