Electrolux - Gibson 240435505 manual Installation, Location, Door Opening, Leveling

Page 4

Installation

This Use & Care Manual provides specific operating instructions for your model. Use the refrigerator only as instructed in this Use & Care Manual. Before starting the refrigerator, follow these important first steps.

LOCATION

Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.

If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher or other heat sources.

The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator.

Consider water supply availability for models equipped with an automatic ice maker.

INSTALLATION

Do Not install the refrigerator where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the refrigerator.

Do Not block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator.

Installation Clearances

Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:

Sides & Top --------------- 3/8” Back ------------------------ 1”

NOTE: If you see black coils/tubing on the back of your refrigerator (air-cooled condenser) leave 3” clearance at top of refrigerator.

DOOR OPENING

NOTE: If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.

Your refrigerator should be positioned to allow easy access to a counter when removing food. To make this possible, the direction in which the doors open can be reversed. See Door Removal & Reversal Instructions on page 6.

LEVELING

All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator is equipped with adjustable front rollers to help level your unit.

To Level Your Refrigerator:

1. Remove toe grille.

2.Use flat-blade screwdriver or 3/8” socket wrench to adjust front rollers.

NOTE: Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope ¼” to ½” from front-to-back. Then level the refrigerator from side to side.

4

Image 4
Contents 240435505 Welcome & Congratulations Please Read and Save These InstructionsImportant Safety Instructions For Your SafetyChild Safety Proper Disposal of Your Refrigerator or FreezerInstallation InstallationLocation Door OpeningBefore Installing The Water Supply Line, You Will Need To Connect Water Supply Line To Ice Maker Inlet ValveDoor Removal and Reversal Instructions Door Removal and Reversal InstructionsTo Remove Freezer Handle To Attach Freezer HandleTo Remove Trim To Attach Refrigerator HandleFeatures At a Glance Refrigerator & Freezer Controls Temperature Adjustment Temperature ControlsCool Down Period Looking Inside Shelf AdjustmentDoor Storage Adjustable Door Bins Humidity Control Some ModelsIce Service Turning Your ICE Maker onTurning Your ICE Maker OFF ICE Maker TipsFood Storage Ideas Food Storage & Energy Saving IdeasEnergy Saving Ideas Normal Operating Sounds & Sights Understanding the Sounds YOU MAY HearDrain Pan Nonremovable Condenser Coils Fan-cooled models onlyCare & Cleaning Care & Cleaning ChartNever Clean Condenser Some Models Replacing the Freezer Light BulbWarranty Information GibsonrefrigeratorplatinumadvantagewarrantyRefrigerator Warranty Canada Freezer temperature too cold Refrigerator temperature isSatisfactory Refrigerator temperature too cold Freezer temperature is