Weber PL - PG. 59 57205 manual Annual Maintenance, Reinstall Burner Tubes

Models: PL - PG. 59 57205

1 84
Download 84 pages 53.71 Kb
Page 27
Image 27
Reinstall Burner Tubes

ANNUAL MAINTENANCE

BURNER TUBE CLEANING

OR REPLACEMENT (continued)

Reinstall Burner Tubes

For Spirit® grills with 2 burners (210 and 220 models):

A)Put burner tube 2 inside cookbox and pass the front end of tube out through burner tube 2 opening. Note: Single row of burner ports should be facing up. Slide burner tube 2 under the guide screw and washer (1).

B)Put burner tube 1 inside cookbox and pass igniter wires and the front end of tube out through burner tube 1 opening (2). Guide wires from burner tube 1 between front cross brace and cookbox and down into cabinet (3).

C)While holding burner tube 1, insert left side of Crossover® tube into Crossover® burner hole (4). Guide right side of Crossover® tube into Crossover® burner hole in burner tube 2 (not pictured). Note: The Crossover® tube burner ports should face the front of the cookbox.

D)Slide burner tube 1 under the guide screw and washer (5).

For Spirit® grills with 3 burners (310 and 320 models):

A)Put burner tube 2 inside cookbox and pass the front end of tube out through burner tube 2 opening (1). Note: Single row of burner ports should be facing up.

B)Slide Crossover® tube alignment guide over the end of burner tube 2 (2). Note: The Crossover® tube burner ports should face the front of the cookbox. With Crossover® tube attached, slide burner tube 2 under the guide screw and washer (3).

C)Put burner tube 3 inside cookbox and pass the front end of tube out through burner tube 3 opening (not pictured). Insert right side of Crossover® tube into Crossover® burner hole in burner tube 3. Slide burner tube 3 under the guide screw and washer (4).

D)Put burner tube 1 inside cookbox and pass igniter wires and the front end of tube out through burner tube 1 opening (5). Guide wires from burner tube 1 between front cross brace and cookbox and down into cabinet (6).

E)While holding burner tube 1, insert left side of Crossover® tube into Crossover® burner hole. Slide burner tube 1 under the guide screw and washer (7).

1

2

3

4

5

1

2

3

4

5

6

7

WWW.WEBER.COM® 27

Page 27
Image 27
Weber PL - PG. 59 57205 Annual Maintenance, Reinstall Burner Tubes, For Spirit grills with 2 burners 210 and 220 models