SIDE BURNER IGNITION & USAGE
SIDE BURNER IGNITION
Lighting with a Match
A) Open the side burner lid (1).
mDANGER
Failure to open the lid before igniting the side burner, or not waiting five minutes to allow the gas to clear if the side burner does not light, may result in an explosive
B)Check that the side burner valve is turned off by pushing side burner control knob in and turning it clockwise until it stops (2). Turn all burners not being
used to the off ( ) position by pushing all control knobs in and turning them clockwise until they stop.
C)If it is not on already, turn the LP cylinder on by SLOWLY turning the cylinder valve counterclockwise (3).
D)Put match in the matchstick holder and strike match. Place matchstick holder with lit match close to side burner (4).
E)Push in and turn side burner control knob counterclockwise to start/high ( ) position (5). You should see a flame.
mCAUTION: Side burner flame may be difficult to see on a bright sunny day.
mWARNING: If the side burner does not light in five seconds:
a)Turn off the side burner and main burner control knobs and gas
supply at source.
b) Wait five minutes to let the gas clear before you try again.
TO EXTINGUISH SIDE BURNER
Push side burner control knob in and turn it clockwise to the off ( ) position. Be sure the side burner is off and cool before closing the side burner lid.
1 |
2 |
3 |
4 |
5 |
WWW.WEBER.COM® 21
