Whirlpool RF199LXH warranty Setting the Controls, Example shows 41⁄2-hour cleaning time

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

NOTE: Make sure the clock is set to the correct time of day. (See “Setting the clock” in the “Using Your Range” section.)

To start cleaning immediately:

1.Press AUTO CLEAN.

This will automatically set a 31⁄2-hour Self-Cleaning cycle.

PRESS YOU SEE

AUTO

CLEAN

NOTE: There will be a 30-minute cool-down	CLEAN
	TIME
1⁄2 hour before the cycle is over.

2.Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the hour and minute pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time between 21⁄2-41⁄2hours shows on the display.

•Use 21⁄2 hours for light soil.

•Use 31⁄2-41⁄2hours for average to heavy soil.

PRESS YOU SEE

HR MIN

CLEAN

TIME

(example shows 41⁄2-hour cleaning time)

3.Start the oven.

Make sure the door is closed all the way. If the door is open even a little, it will not lock. Press the door closed if needed. If the door is closed, it will lock as soon as you press START/ENTER.

PRESS

START

ENTER

5 SEC

YOU SEE

HEATON TIMED

LOCKED CLEAN TIME

4. After the Self-Cleaning cycle ends:	YOU SEE
LOCKED goes off and the door unlocks.

CLEAN

5.After the oven cools to room temperature, wipe

off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mildly abrasive cleanser or cleaning sponge.

To delay the start using delay start time:

1.Press AUTO CLEAN.

This will automatically set a 31⁄2 hour Self-Cleaning cycle.

NOTE: There will be a 30-minute cool-down

1⁄2 hour before the cycle is over.

PRESS YOU SEE

AUTO

CLEAN

CLEAN TIME

continued on next page

29