Installation Requirements, ToolsandParts

INSTALLATION REQUIREMENTS

ToolsandParts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

■Level

■Drill with 1¼" (3.0 cm), ³⁄₈" (9.5 mm), and ⁵⁄₁₆" (7.9 mm) drill bits

■Pencil

■Wire stripper or utility knife

■Tape measure or ruler

■Pliers

■Caulking gun and weatherproof caulking compound

■Vent clamps

■Jigsaw or keyhole saw

■Flat-blade screwdriver

■Metal snips

■Phillips screwdriver

■Metric hex key set

Parts needed

■Home power supply cable

■½" (12.7 mm) UL listed or CSA approved strain relief

■3 UL listed wire connectors

For vented installations, you will also need:

■1 wall or roof cap

■Metal vent system

For non-vented (recirculating) installations, you will also need:

LocationRequirements

IMPORTANT: Observe all governing codes and ordinances.

Have a qualified technician install the range hood. It is the installer's responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located behind the left filter on the rear wall of the vent hood.

Canopy hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance.

Grounded electrical outlet is required. See “Electrical Requirements” section.

The canopy hood is factory set for venting through the roof or wall. For non-vented (recirculating) Installation see “For Non- vented (recirculating) Installations Only” in “Connect Vent System” section. Recirculation Kit Part Number W10349327 is available from your dealer or an authorized parts distributor.

NOTE: This product will not comply with Energy Star specifications when installed as non-vented (recirculating) with the optional recirculation kit.

All openings in ceiling and wall where canopy hood will be installed must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local codes.

Product Dimensions

■Recirculation Kit Part Number W10349327 for non-vented (recirculating) installations only. See “Assistance or Service” section to order.

■6" (15.2 cm) dia. round metal vent duct - length required is determined by ceiling height.

Parts supplied

Remove parts from packages. Check that all parts are included.

■ Hood canopy assembly with ventilator and light bulbs
	installed
■ Vent transition with back draft dampers installed
■	Metal grease filter(s)
■ Vent cover support bracket
■	Mounting template
■ 2-piece vent cover
■ 2 - 3.5 x 9.5 mm screws
■	2	- 2.9 x 6.5 mm screws
■	6	- 5 x 45 mm mounting screws
■	2	- 8 x 40 mm wall anchors
■	4	- 10 x 50 mm wall anchors

7¹⁄₄"

(18.3 cm)

30" (76.2 cm) or

36" (91.4 cm)

8¹⁄₈"

(20.7 cm)

*28⁷⁄₈" (72.6 cm) min.

42¹⁄₁₆" (106.9 cm) max.

**28³⁄₈" (72.0 cm) min. 38" (96.6 cm) max.

14¹⁄₈"

(35.9 cm)

10" (25.4 cm)

20" (50.8 cm)

1¹ " (4.0 cm)

■ T20 Torx®† adapter

®†TORX is a registered trademark of Saturn Fasteners, Inc.

*For non-vented (recirculating) installations

**For vented installations

GXW7330DXS, GXW7336DXS specifications

The Whirlpool GXW7336DXS and GXW7330DXS are two remarkable range hood models designed to elevate your kitchen experience. These models combine style, functionality, and advanced technology, making them an excellent choice for any modern kitchen.

One of the standout features of both the GXW7336DXS and GXW7330DXS is their powerful Ventilation system. With a high CFM rating, these range hoods ensure efficient removal of smoke, odors, and grease from your kitchen, keeping the air fresh while you cook. The models offer multiple ventilation speeds, allowing users to adjust the airflow according to their cooking needs.

These range hoods are equipped with Bright, LED task lighting that illuminates the cooking surface, making it easier to see while you prepare meals. The soft, warm light enhances visibility without being harsh, creating a pleasant cooking environment.

Another important characteristic is the easy-to-clean filters. Both models come with dishwasher-safe grease filters. This feature simplifies maintenance, allowing you to keep your range hood in top condition without the hassle of manual cleaning. The filters trap oil and other airborne particulates, enhancing the overall efficiency of the ventilation system.

The design of the GXW7336DXS and GXW7330DXS adds a sleek and modern touch to your kitchen. They feature a stainless steel finish that not only enhances aesthetics but also provides durability and resistance to stains. These models are available in different sizes to fit various cooking setups, ensuring you find the perfect match for your kitchen space.

Whirlpool has also integrated user-friendly controls in both models. The intuitive design includes a straightforward interface that makes it easy to operate, even while hands are busy with cooking tasks.

Moreover, these range hoods are designed to operate quietly, allowing you to continue conversations or enjoy your favorite music while cooking. The lower noise levels make them suitable for open-concept kitchen-living areas.

In summary, the Whirlpool GXW7336DXS and GXW7330DXS are exceptional range hoods boasting powerful ventilation, easy maintenance, stylish design, and quiet operation. These models are perfect for anyone looking to enhance their kitchen both functionally and aesthetically. Whether you’re a casual cook or an aspiring chef, these range hoods are an investment that brings convenience and style to your culinary adventures.