Foster 7372 241 user manual General off, Displaying power levels, Power Management

Page 11

change the level, the safety mechanism will switch the hotplate off after 10 hours.

Protection against overheating

Induction cooktop is also fitted with safety device against overheating which protects electronic parts from damages. This device operates on several levels. When cooking zone’s temperature increases excessively, the two-stage fan switches first. If this is not enough, extra powerful heating is deactivated, and finally the safety device either reduces the heating power of certain cooking zones or turns them off completely. When the hotplate cools off, the full power of hotplate is again available. So during the operation you can hear an steady hum due to the turning on of the cooling fan. It is possible that the cooling fan continues to operate even after the cooktop turning off.

Switching a heater off Pressing the heater keys (+ and -) at the same time switches off the

manuallycorresponding heater and the display shows the power level as 0. We can also switch off the heater by pressing the key (-) until the display shows the power level as 0.

General off

The general off function can be performed regardless of the operating mode of the

 

cook top by pressing the on/off sensor (F).

 

When the cook top is turned off, a beep sounds and the displays turn off, as long

 

as an ‘H’ is not being shown on the corresponding display as a result of residual

 

heat or an alarm.

Displaying power levels

Power level 0:

 

A constant “0” is displayed on the heater display. If the induction generator

 

indicates residual heat, the display alternates between “0” and “H”. This

 

indication only disappears when there is no longer any danger (at 50 °C).

 

The display shows a “0” as long as the temperature remains below 50 °C,

 

whereas it shows an “H” whenever the temperature exceeds 50 °C.

 

To save energy, turn off the burner in advance, in order to exploit the residual

 

heat.

 

Power level 1…9, P:

 

If no pan is detected or if an aluminium pan is detected, the power level flashes

 

on the heater display. After 30 seconds, if a non-aluminium pan is not detected,

 

the power level returns to 0.

 

When a non-aluminium pan is detected, the power level is shown constant on

 

the heater display.

Power Management

In cases where the cooktop is already in operation for some time, to change the

 

limit of power, before proceeding with the planning, unplug it, then reinsert the

 

plug after a couple of minutes.

 

The power drawn is 2800 W, but you can increase it at 3500 W, 6000 W or

 

7200W.

28

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Cod Page Page Mounting the BUILT-IN Cooktop Built-in induction hob opening dimensionsConnection to the Power Supply Induction hotplates = extra powerful setting Hotplate functionTecnical Information PrincipleHotplate may be damaged if Power regulationPower Purpose For a certain heater Selecting a power levelHob control elements Key lock Operating the timerPan sensor Booster functionTimer Countdown End Automatic safety offIndication of the heater on timer Increasing the value of the timerGeneral off Displaying power levelsPower Management Sequence to finish recording the new Cooktop Power Limit is Power management for a Limited Power Cooktop ECOSequence to set a new Cooktop Power Limit is For selecting a new Power LimitError Code Error Description Safety functions and error displayCleaning and Maintenance of Cooktop Foster spa

7372 241 specifications

Foster 7372 241 is a cutting-edge solution in the realm of industrial equipment designed to revolutionize various operational processes. This model is tailored to meet the demands of modern industries through its array of advanced features and technologies.

One of the standout attributes of the Foster 7372 241 is its robust construction. Built from high-quality materials, it ensures durability and longevity even in the most challenging environments. This resilience contributes to reduced maintenance costs and downtime, making it an economical choice for businesses focused on efficiency.

The operational efficiency of the Foster 7372 241 is amplified by its innovative power management system. This feature optimizes energy consumption, allowing users to achieve higher performance levels while minimizing energy costs. The equipment is equipped with smart sensors that monitor usage patterns and adjust operations accordingly, ensuring that resources are utilized efficiently.

A significant technological advancement in the Foster 7372 241 is its integration of IoT connectivity. This functionality enables real-time monitoring and data analysis, providing users with crucial insights into performance metrics. By leveraging this data, businesses can make informed decisions, troubleshoot issues promptly, and enhance overall productivity. The IoT capabilities foster seamless communication between devices, facilitating automated processes and remote control operations.

In terms of usability, the Foster 7372 241 features an intuitive interface that simplifies operation. With user-friendly controls and a clear display, operators can easily navigate through various functions, making the equipment accessible to both seasoned professionals and newcomers alike.

Safety is another primary consideration in the design of the Foster 7372 241. It comes equipped with multiple safety features such as emergency shut-off systems, safety guards, and user alerts to minimize risks during operation. This commitment to safety not only protects the workforce but also ensures compliance with industry regulations.

Another noteworthy characteristic of the Foster 7372 241 is its adaptability. The equipment can be customized to suit specific operational needs, allowing businesses across different sectors to tailor it to their workflows. This versatility makes it an attractive investment for companies looking to enhance productivity while maintaining flexibility in their processes.

In summary, the Foster 7372 241 embodies a fusion of durability, efficiency, smart technology, and user-oriented design, making it an invaluable asset in any industrial setting. Its features and capabilities position it as a leader in the industry, promising significant advancements in operational performance and reliability.
Top Page Image Contents