Foster 7372 241 Power management for a Limited Power Cooktop ECO, For selecting a new Power Limit

Power management for a Limited Power Cooktop (ECO)

Power management for a Limited Power Cooktop (ECO)

The sequence to set a new Cooktop Power Limit is:

▪During the first 30 seconds after plugging the appliance

▪The Touch has to be unlocked and all Heaters Off

▪Push at the same time (A+,A-,D-,D+) keys

▪Once this is done, a beep sounds and “Po” Characters will be in the timer display and the “actual Cooktop Power Limit” will be in the display 1 and in the display 4.

For selecting a new Power Limit:

▪With any Heater (+ or -) key, the Power Limit is increased/decreased. The selectable powers are: 2800 W, 3500 W, 6000 W or 7200W.

The sequence to finish recording the new Cooktop Power Limit is :

▪Push at the same time (A+,A-,D-,D+) keys.

▪Once this is done, new Cooktop Power Limit is recorded and there is a system reset.

To finish without recording changes:

▪If during 60 seconds there is no action, changes are not recorded and there is a system reset

For reduced power cooktops, each time the user tries to increase the power, the total power level of the cooktop is calculated. If this total power level is greater than the cooktop power limit, the power increase is not allowed. An error beep sounds and the heater display shows the actual power level and an ‘r’ blinking.

Induction	1	2	3	4
plate
Ø (mm)	210	145	210	145
Level		Power	(W)
0	0	0	0	0
1	100	75	100	75
2	200	150	200	150
3	300	300	300	300
4	500	400	500	400
5	700	500	700	500
6	900	600	900	600
7	1100	800	1100	800
8	1300	1000	1300	1000
9	1500	1200	1500	1200
P	2000	1600	2000	1600

29