Foster S4000 For MULTI-PURPOSE Products Option, Advice, Proceed to set the option, if necessary

Page 10

EN 5/ DETERGENT PRODUCTS AND SETTING THE WATER SOFTENER

•FOR MULTI-PURPOSE PRODUCTS: OPTION

•Your appliance can be specially set to use multi-purpose if the water hardness is < 25°F or < 2,5 mmo/l.

Advice:

To provide better coverage of the wide range of multi-purpose products available, your dishwasher’s “4-in-1” option has two possible settings, accessible via the “Set” button.

“Extra Dry” improves the drying results in the event of reduced performance from the “2-in-1”,“3-in-1” or “4-in-1” types of multi-purpose product.

“Sparkling Clean” enables you to prioritise the sparkle of your crockery whatever the type of multi-purpose product used.

• Proceed as follows to adjust the water softener on the control panel:

— Access setting mode by holding down the “Set ” button until

 

 

 

 

Dirty

 

 

 

 

 

 

 

you hear a double audible signal (long beep).

DCS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

— The screen displays “SEt” to indicate that you are in

 

 

 

 

 

 

 

 

 

Bio

 

Quick

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Setting mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

End

To use multi-purpose tablets, you must select setting H0 or

H I or H2, depending on the water hardness. To do this, keep on briefly pressing one or other of the keys until you reach the desired setting.

• Proceed to set the option, if necessary

(Light unlit) : deactivates the “4 en 1” option (Light flashing): corresponds to activation of the

“4 en 1” function with the setting for “Sparkling Clean”. This enables you to prioritise a brilliant finish for your crockery.

(Light permanently lit) : corresponds to activation of the “4 en 1” function with the setting for “Extra Dry”. “Extra dry” enhances the drying results if performance is reduced.

— The setting is validated automatically after 10 seconds if the “Set” button in not pressed again.

 

Testing strip

 

 

 

 

Hardness

0-10°F

10-18°F

18-25°F

 

0-1mmol/l

1-1.8 mmol/l

1.8-2.5 mmol/l

 

 

HI

Function Deactivated

H0

H I

H2

SET

Multi-purpose products

H0

HI

H2

 

“Sparkling Clean”

 

Multi-purpose pro-

H0

HI

H2

 

ducts “Extra Dry”

 

 

 

 

Important :

The multi-purpose products setting enables you to deactivate the rinsing and salt warning lights only on H0 and “4-in-1”.

• Loading multi-purpose tablets

To make loading the detergent easier, the distributor is located on the front of the upper basket; it is compatible with all the products recommended for your dishwasher.

•Place the tablet in the external compartment (Fig 04 on previous page) or

or, for optimum operation, pull out the distributor’s drawer and lay the tablet there. (Fig 05 on pre- vious page).

- Close the distributor.

39

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Fully BUILT-IN Dishwasher S4000 EN Contents Children’s safety Safety InstructionsInstallation UseECONOMICAL, Environmentally Friendly Washing Environmental ProtectionEnsure that the water softener is correctly set see Regenerating salt tank Waste filter Main filter Rinsing product dispenserPresentation of the Control Panel Detergents, rinsing liquid or an agent acting as the salt Water HardnessDetergents, rinsing liquid and an agent acting as the salt Soft Hardness Table10F OptionalTraditional tablets For Traditional ProductsPowder or liquid in the distributor’s drawer Fig Proceed to set the option, if necessary AdviceFor MULTI-PURPOSE Products Option Loading multi-purpose tabletsRegenerating salt indicator Loading the regenerating salt FigRinsing product Fig Adjustment leverChecking the level of rinsing liquid Lower Basket Very importantUpper Basket Cutlery Basket Cutlery basket slides to allow for modu- lable loadingAnti-leak system Total safetyAnti-overflow system If an anomaly occursProgramme Sequence Programmes TableWashing at 45C Rinse Hot rinse Drying Cold pre-wash 100’ 130’ Washing at 50C Rinse Hot rinse DryingWashing at 45C Rinse Hot rinse 60C Drying Recommended programme EN50242 IEC 436/DINImmediate programme start ’OPTION DCS Dirt System Control B Cancelling a programmeSetting the audible signal Stopping the applianceCleaning the Waste Filters ReinstallationProlonged stoppage Cleaning and upkeep of your appliancePeriodically Professional expertise for the general publicBefore Calling for Service Summary of the FaultsTip Indicator Lights Relating to PROGRAMMING, DisplayPoor Washing Results Product Setting Prioritizing Drying Tener is set correctly. Adjust itCheck the indicator light Dullness Product Setting prioritizing brilliancePoor Operation Poor Drying ResultsIntervention Work Original PartsTests to Standard EN Details common to all modelsTests according to the mixed IEC 436/DIN 44990 method Egg/oeuf Meat/viande Spinach/épinards Foster spa
Related manuals
Manual 22 pages 5.85 Kb Manual 43 pages 27.47 Kb

S4000 specifications

The Foster S4000 is a versatile and powerful piece of equipment that has garnered attention in various industries for its impressive performance and innovative features. Designed for both efficiency and ease of use, the S4000 is suitable for a wide range of applications, from industrial settings to commercial operations.

One of the standout features of the Foster S4000 is its advanced automation capabilities. The system integrates state-of-the-art technologies that allow users to streamline processes, thereby increasing productivity. It boasts a user-friendly interface that simplifies operation, enabling even those with minimal technical skills to manage complex tasks efficiently.

At the heart of the S4000 is its robust engine, which delivers exceptional power and torque. This not only enhances the machine's performance but also contributes to its durability, ensuring it can handle demanding workloads without compromising reliability. The engine is designed to operate smoothly under various conditions, making it ideal for outdoor and indoor applications alike.

The S4000 incorporates cutting-edge sensory technology that enhances precision in operation. This technology enables real-time monitoring, allowing users to make informed decisions based on data collected during its operation. This aspect is particularly beneficial in settings where accuracy is paramount, such as manufacturing and quality control environments.

Safety is a top priority with the Foster S4000. The unit comes equipped with multiple safety features, including emergency stop buttons, overload protection, and automatic shut-off mechanisms. These features not only safeguard the operator but also prolong the life of the machine by preventing damage due to mishandling or unforeseen circumstances.

Moreover, the S4000 is designed with sustainability in mind. Its energy-efficient engine reduces fuel consumption, making it an eco-friendly option without compromising performance. The materials used in its construction are also chosen for their longevity and minimal environmental impact, contributing to a reduced carbon footprint.

In conclusion, the Foster S4000 stands out as a modern solution for various industrial and commercial applications. With its combination of advanced technologies, exceptional performance, and commitment to safety and sustainability, it is a top choice for businesses looking to enhance their operational efficiency and productivity. Its blend of power, precision, and user-friendliness makes it an indispensable asset in today’s competitive market.
Top Page Image Contents