ADJUSTMENTS BEFORE OPERATIONS
En
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote control).
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Volume
Turn VOLUME (Press VOLUME +, - on the remote control).
Adjust from 0 (minimum) to 40 and MAX (maximum).
Tip:
Volume level setting is retained during
DEMO
If the clock has not been set, a DEMO appears on the display when the unit is turned off.
To deactivate and activate the DEMO
Press DEMO/ECO when the unit is turned off.
Spectrum analyzer display
You can change the spectrum analyzer display.
Press MODE twice and then within 4 seconds turn MULTI JOG to select one of the three spectrum analyzer displays.
On the remote control, press SHIFT+DISPLAY repeatedly.
-NORMAL: Displays the fluctuation from low frequencies to high ones
-BASS: Displays the fluctuation of low frequencies only
-LEVEL: Displays the fluctuation of the average of all the frequencies.
Dial Function
Turn the Dial Function to select a function (TAPE, TUNER, VIDEO/AUX or CD).
The red light beside the selected function turns on.
8