Auto Graphic equalizer (AG)
The unit automatically selects a sound equalization curve to match the music program type (PTY) data being transmitted from the station. (e.g. 'POP' curve is selected for POP M [PTY].)
Press AG when tuning in to an RDS station.
"AG " lights up.
To cancel AG function
Press AG so that "AG " disappears.
Clock-time (CT)
You can automatically set and update the clock on the hour every hour just by tuning in an RDS station since RDS stations transmit clock signals.
1Press RT repeatedly to select "CT ON " while the unit is on and the time is displayed (see "Setting the clock").
2Tune in an RDS station.
To deactivate CT function (If the clock is set wrongly due to an incorrect clock signal)
Repeat step 1 to select "CT OFF ".
Note on RDS features
The RDS features described above may not function correctly if the RDS transmission data from the station contains too much interference or the reception signal is too weak.
Adjustments
Antennas
Keep antennas away from metallic objects, electrical equipment
and cords.En FM antenna: Extend fully and position for the best reception.
If receiving condition is poor, connect optional outdoor antenna to FM 75 Ω terminal.
MW/LW antenna: Rotate to find best reception.
To switch to monaural FM reception
Press SHIFT+TUNER MODE on the remote control. With each press, "MONO " and "STEREO " are displayed alternately on the display.
Tip:
When FM stereo reception is poor, switching to monaural reduces noise.
To switch the MW tuning interval
Hold down BAND and press POWER on the unit. With each press, the MW tuning interval alternates between 9 kHz/step and 10 kHz/step.
Tip:
The default is 9 kHz/step. Change it only when using the unit in a 10 kHz/step area. Switching MW tuning interval clears all the preset stations.
15