Replacing the oven light - Pic. 14
The oven is equipped with a lamp having the following features:
25W
screw cap
T 300° C
WARNING: disconnect the appliance from the power supply.
lf the oven light needs to be replaced, the protective cover «A» must be removed by turning it anticlockwise. After the light has been replace, refit the protective cover «A». (Pic. 14).
Removing the oven door -Pic. 15
To aid cleaning and make access to the oven interior easier, the oven door can be simply removed.
To facilitate cleaning of the oven, the door can be removed via the hinges as follows:
hinges with movable bolt
We recommend to take the handle in the middle
when opening the oven door.
With the door open, you can see the 2 hinges A which are provided with 2 movable bolts B. When the bolt B is raised, the hinge is released from its housing.
Having done this, the door must be lifted upwards and removed, sliding it towards the outside;
grip the sides of the door near the hinges when performing these operations.
To refit the door, firstly slide the hinges into their slots.
Before closing the door, remember to rotate the two movable bolts B used to hook the two hinges.
Pic. 14 |
B
A
Pic. 15
32