Aiwa XR-FA500 manual Timer recording, To check the timer setting, To change the timer setting

Page 17

Timer recording

Timer recording is available only for TUNER sources.

1Hold down SHIFT and press TIMER on the remote repeatedly so that "5" and "REC" are displayed.

2Within 6 seconds, press ENTER. "ON TIME" is displayed.

3Press f or g to set the timer start hour, and press ENTER.

4Press for gto set the minute, and press

ENTER.

"OFF TIME" is displayed.

5Set the time to stop recording by following the same procedures as steps 3 and 4.

6Select the band and tune in the desired station.

7Insert a recordable tape and then turn the unit off.

"5" and "REC" remains in the display to indicate the timer standby mode (when ECO mode is deactivated). At timer-on time, the unit turns on and records the selected source. After the specified timer-activated duration, the unit turns off again.

•To stop timer setting in steps 1 to 4, press CLEAR. Timer standby mode is also cancelled.

•The timer recording is not activated when the clock is not set. ("SET NG" is displayed.)

•The timer recording will not begin unless the unit is turned off first.

To check the timer setting

Hold down SHIFT and press TIMER on the remote repeatedly so that "PLAY" or "REC" appears in the display.

The timer-on time, the time to stop playback/recording and the source are displayed for 6 seconds.

To change the timer setting

Reset the timer again.

To cancel the timer

Hold down SHIFT and press TIMER on the remote repeatedly until "OFF" is displayed. "5" and "REC" disappear from the display.

Tip:

Your timer setting is retained even if the timer is cancelled. Next time the timer is activated, you can change your previous setting, or simply use the same setting again.

Notes

•The timer playback performs every day at the specified time unless you cancel it.

•You cannot set the same time for timer-on time and timer- off time. "SET NG" is displayed if you do that. In this case, reset the time.

•The timer playback will not begin unless the unit is turned off first.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Micro Hi-Fi Component System XR-FA500 On operating voltage On safetyOn placement Table of Contents Preparations Remote commanderConnection SpeakersMain unit rear Parts and ControlsMain unit front REV Mode 14 Power 10/0, 10 8T/g8, 10, 12-14, 16 Enter 7, 10, 16, 17 Determines the mode # Volume +,-13Setting the clock Adjustments Before OperationPower ECO modeShuffle play CD OperationsPlaying a CD Repeat playProgrammed play To cancel programmed playTo clear a track To clear the programPreset tuning Manual tuningAutomatic presetting Manual presettingTuning in preset stations RDS featuresProgram Service station name PS Radio Text RTPTY Search To cancel the standby mode for Info searchInfo Search Clock-time CTAdjustments Sound AdjustmentsVolume MutingPlayback Tape PlaybackTo record a CD Tape RecordingTo stop recording To erase a tapeSleep timer Timer OperationsTimer playback Press Volume +, -to set the volume levelTo check the timer setting Timer recordingTo change the timer setting Reset the timer againTroubleshooting Care and maintenanceReference GeneralTape deck CD playerSpeakers Main Unit CX-LFA500 Tuner Specifications

XR-FA500 specifications

The Aiwa XR-FA500 is a notable stereo system that captured the attention of audiophiles and casual listeners alike with its impressive features and technologies. Known for its compact size and powerful performance, this all-in-one audio solution integrates various functionalities into a single device, making it suitable for diverse audio needs.

One of the standout features of the XR-FA500 is its robust amplifier output, which delivers clear and powerful sound without distortion. It supports a wide frequency response, ensuring that both low and high notes are reproduced accurately, providing an immersive listening experience that appeals to all genres of music.

In terms of connectivity, the Aiwa XR-FA500 is equipped with multiple input options, including auxiliary inputs, allowing users to connect external devices such as smartphones, tablets, and computers. This versatility makes it easy to play digital music libraries or stream audio wirelessly using Bluetooth technology. The inclusion of a built-in CD player also caters to those who still enjoy their physical music collections, offering convenience and ease of use.

The system’s design is sleek and modern, featuring intuitive controls that enhance user experience. The digital display provides clear information about the current track, volume level, and other settings, making it easy for users to navigate through their audio experience.

Moreover, the XR-FA500 incorporates advanced sound processing technologies, such as equalization presets, that allow users to customize their audio output according to their preferences. Whether listening to classical, rock, or pop music, users can tailor the sound profile to match their musical taste.

Another notable aspect of the Aiwa XR-FA500 is its built-in FM/AM tuner, which offers access to a wide range of radio stations. With preset options, users can quickly switch between their favorite channels, providing yet another layer of entertainment.

In terms of build quality, the XR-FA500 is well-constructed, ensuring durability and longevity. While compact, it is designed to deliver exceptional sound quality, making it an excellent choice for small to medium-sized rooms.

Overall, the Aiwa XR-FA500 exemplifies a balance of performance, versatility, and user-friendly design, making it an excellent addition to any audio enthusiast's setup. Whether it’s used for casual listening, parties, or focused music enjoyment, the XR-FA500 delivers impressive sound and a multitude of features that enhance the overall audio experience.
Top Page Image Contents