Estate TS25AQ warranty Before Using Your Refrigerator, Cleaning it, Plugging it

Before Using Your Refrigerator

I

I

In This Section

Ml@PagO

Cleaning lt ...............................................5 lnstalllng lt properly ...............................6 I

Plugglng lt In ..........................................5 Levellng It ............................................... 6 I

It is important to prepare your refrigerator for use. This section tells you how to clean it, connect it to a power source, install it and level it.

Cleaning it

Removing packaging materials

Remove tape and any inside labels (except the model and serial number label) before using the refrigerator.

NOTE: Do not remove any permanent instruction labels inside your refrigerator. Do not remove the Tech Sheet fastened under the refrigerator at the front.

To rwnovo any remaining glue:

l Rub briskly with thumb to make a ball, then remove.

OR

l Soak area with liquid handdishwashing detergent before removing glue as described above. Do not use sharp instruments, rubbing aloohol, flammable fluids or abrasive cleaners. These can damage the rnateriil. See “Important Safety Instructions” on page 3.

Cleaning it before use

After removing all packaging materials, clean your refrigerator before using it, if necessary. See cleaning instructions on pages 20-21.

Plugging it in

Recommended Grounding Method

A115Volt,60Hz.,AConlv15or20ampere

fused and property grour&d electrical ’ supply is required. lt is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.

See Electrical Requirements and Ground- ing Instructions Sheet in your Liierature Package.

&prong grounding type wall receptacle

Refrigerator power cord

grounding PlW