Aiwa NSX-MTD9 To turn the power on, To turn the power off, Illumination guides, Flash windows

Page 10

To turn the power on

Press one of the function buttons (TAPE, TUNER, VIDEO/AUX, CD, MD).

Playback of the inserted disc begins, or the previously tuned station is received (Direct Play Function). POWER is also available.

When the unit is turned on, the disc compartment may open and close to reset the unit.

To turn the power off

Press POWER.

Illumination guides

Whenever one of the function buttons is pressed, the buttons for that operation light up or flash.

Flash windows

The windows of the CD compartment and the cassette decks light up or flash while the unit is being powered on.

To turn off the light of the CD window, press

while pressing CD. To turn back on, repeat the above.

To turn off the light of the cassette decks, press

while pressing TAPE.. To turn back on, repeat the above.

• Do not perform this operation furring recording.

 

To change the brightness level of the display

1 Press ECO so that "ECO MODE" is displayed.

2 Within 4 seconds, turn MULTI JOG to display "DIM MODE", and then press ENTER within 4 seconds.

3 Within 4 seconds, turn MOULTING to select the dimmer mode as below

The mode will be automatically set after 4 seconds. It will also be set if ENTER is pressed within 4 seconds after step 3..

DIM-OFF: The normal display.

DIMMER 1: The illumination of the display is dimmer than usual.

DIMMER 2: The illumination of the display is dimmer than DIMMER 1.

DIMMER 3: The illumination of the display is dimmer than DIMMER 2. The spectrum analyzer, the window of the CD compartment and the buttons lamps light off.

If the timer recording (page 26) is done with the economizing mode (page 6) set to "ON" and the power turns off, the dimmer mode will be set to "DIMMER" the next time power is turned on.

Game Demo

Page 9 Page 11
Image 10
Page 9 Page 11
Contents NSX-MTD9 Precautions pgAiwa Owners RecordElectric Power PrecautionsInstallation AC power cordPrecautions cont. pg Table of ContentsSetting UP Preparations pgConnections Before connecting the AC cordPositioning the Speakers Front speakers Center speakerConnect the surround speakers to the main unit Preparations cont pgConnect the right and left speaker to the main unit Connect the center speakerConnect the AC cord to an AC outlet Connect the video equipmentConnect the Television to the video equipment To position the antennas FM feeder antennaTo connect other optional equipment page 29 Connecting AN Outdoor AntennaRemote Control Inserting batteriesPreset on the remote control When to replace the batteriesUsing the remote control Before OperationIllumination guides To turn the power onTo turn the power off Flash windowsPress twice to stop the remaining two numbers PressPress once To mute the game soundPress ECO Setting the Power Economizing ModePreparations cont. pg Press Enter within 4 secondsSound pg Audio AdjustmentsVolume BBE SystemSuper T-BASS System Using the Beat FunctionSound cont pg Rhythm Play Function Beat Master DXPress Beat ON/OFF to switch the function on Turn Multi JOG to select the rhythm tempoUsing the Auto mode To stop the beat function Press Beat ON/OFFUsing the Fill in Function Spice A/B function Using the Spice FunctionTo use the Fill in function Press Spice aUsing the Auto Spice function Still holding down the button, turn Multi JOGSelecting the Programmed Equalization Curve Graphic Equalizer GEQPlay the music source To select the equalization curve with the remote control Setting NEW Equalization Curves ManuallyTo cancel the selected mode Sound cont. pgTo adjust the volume of the surround speakers To select a manual-preset GEQPress Frequency UP or Frequency Down to select a frequency To select the DSP mode with the remote control Selecting a Programmed DSP Surround ModeWhen the music source is monaural DSP SurroundBasic Operations CD Playing pgLoading Discs Playing Discs CD Playing RANDOM/REPEAT PlayBlank Skip Play Programmed Play Press Prgm twice in stop modePress the numbered buttons 0-9 and +10 to program a track Manual Tuning Radio Reception pgTo change the AM tuning interval Presetting StationsWhen an FM stereo broadcast contains noise Repeat steps 1To clear a preset station Preset Number TuningSelecting a preset number on the main unit Tape Playback pgTo select a reverse mode deck 2 only Playing Back a TapeTape Playback cont. pg Music SensorContinuous Play About cassette tapesRecording pg Basic RecordingInserting Blank Spaces Sound Adjustment During RecordingREC/REC Recording Dubbing a Tape ManuallyDubbing the Whole Tape To set the Dolby NR when playing back the dubbed tapePress Sync DUB once or twice to start recording Press CD and load the discs Press CD EDIT/CHECK once AI Edit RecordingPress one of the Disc Direct Play 1-5 to select a disc Multi JOG Programmed Edit Recording Recording contpgPress CD and load the discs Press CD EDIT/ Check twice Repeat for the rest of the tracks for side a Dolby PRO Logic pg Adjusting Speaker Level BalanceTo change the program of each side To change the delay time Press Manual Select again to stop the noise signalPress Dolby PRO Logic to select Normal Play with Dolby PRO Logic Dolby PRO Logic cont. pgAdditional Dolby PRO Logic Modes Microphone Mixing To adjust the balance of connected speaker sound levelsKaraoke pg To select Phantom or 3 StereoLocal FADER/MULTIPLEX Functions To change the delay time of echoWhen not using the microphones To record microphone sound mixed with source soundKaraoke cont pg Karaoke ProgramAfter a track is played, it is cleared from the program Clock and Timer pg Setting the ClockSetting the Sleep Timer To check the time remaining until the power is turned off Clock and Timer cont pgSetting the Timer To cancel the sleep timerPress Timer repeatedly until appears on the display Press one of the function buttons to select a sourceTimer Recording VIDEO/AUX Jacks Connecting Optional EquipmentWhen connecting a turntable MD JacksCD Digital OUT Optical Jack SUB Woofer JackCH Input Jacks Listening to External SourcesOther Connections cont pg Connecting a DVD PlayerTo adjust the sound level of the external source Listening to Dolby Digital Surround SoundPress VIDEO/AUX repeatedly until 5.1ch in is displayed Start playing Dolby Digital Surround sound on the DVD playerCare and Maintenance General pgTuner Section Troubleshooting GuideCassette Deck Section General cont pg SpecificationsCD Player Section BBE System Dolby NR/DOLBY PRO Logic Parts IndexCopyright Name Volume MIC Echo Disco Live Stadium Hall ECO Call toll free 1-800-BUY-AIWA. United States and Puerto Rico

NSX-MTD9 specifications

The Aiwa NSX-MTD9 is a dynamic and innovative stereo system that showcases the best of Aiwa's engineering prowess. This model is designed to deliver high-quality sound and a plethora of features that cater to music enthusiasts. With its compact design, the NSX-MTD9 fits seamlessly into any space, making it an ideal choice for both home and office environments.

At the heart of the NSX-MTD9 is a powerful amplifier that produces clear and dynamic audio across a wide range of frequencies. This system utilizes a specially designed speaker arrangement to ensure an immersive listening experience. The two-way speaker configuration, combined with a well-balanced woofer and tweeter setup, offers deep bass and crisp highs, creating a full sound that can fill any room.

One of the standout features of the Aiwa NSX-MTD9 is its built-in CD player, allowing users to enjoy their favorite CDs with rich sound quality. Additionally, the system supports cassette playback, enabling users to relive the nostalgia of their favorite mixtapes. The integrated AM/FM tuner provides access to a wide array of radio stations, ensuring endless entertainment options.

The NSX-MTD9 boasts several modern technologies, including the capability to connect via Bluetooth. This wireless functionality allows users to stream music from their smartphones and other Bluetooth-enabled devices, providing convenience and versatility. The inclusion of USB ports also enables easy playback from flash drives, making it simple to enjoy digital music collections.

Another impressive feature of the Aiwa NSX-MTD9 is its comprehensive equalizer settings. Users can customize their listening experience with adjustable presets, tailoring the sound profile to their personal preferences or to genre-specific requirements. The system also includes a remote control for hassle-free navigation of settings, tracks, and more.

In terms of design, the Aiwa NSX-MTD9 exhibits a modern aesthetic with a sleek finish that complements its high functionality. Its user-friendly interface ensures that even those unfamiliar with stereo systems can easily operate the NSX-MTD9.

In summary, the Aiwa NSX-MTD9 is a versatile and feature-rich stereo system that combines modern technology with high-quality audio performance. Its CD player, cassette functionality, Bluetooth connectivity, and customizable sound settings make it an excellent choice for music lovers who appreciate both classic and contemporary audio formats. With its stylish design and powerful features, the NSX-MTD9 stands out as a remarkable option in the world of personal audio systems.
Top Page Image Contents