Aiwa NSX-MTD9 manual Press Dolby PRO Logic to select Normal, To change the delay time

Page 44

Use the remote control.

1 Press DOLBY PRO LOGIC to select NORMAL.

"NORMAL" is displayed.

If "PHANTOM" or "3 STEREO" is displayed, press DOLBY PRO LOGIC repeatedly until "NORMAL" is selected.

2 Press MANUAL SELECT and hold it down for about four seconds until "L" flashes.

A noise signal is sent to each channel in turn in the following sequence.

3 Adjust the sound level of the center and the surround speakers.

When "CEN" or "S-R" or "S-L" is displayed, press or to adjust the volume of the center or each surround speaker to match the level of the front speakers.

To adjust the balance between the left and right front speakers, see page 8. At this time, the DOLBY PRO LOGIC mode should be canceled by pressing DOLBY PRO LOGIC until "PRO-OFF" is displayed.

4 Press MANUAL SELECT again to stop the noise signal.

NOTE

•If the surround speakers or the center speaker level of the DOLBY PRO LOGIC is changed, that of the SURROUND system (page 12) and the DOLBY DIGITAL SURROUND (page 30) are also changed.

•While "S-L" or "S-R" is displayed, both surround speakers output the signal noise together. However, only the sound level of one surround speaker is displayed as "S-L" or "S-R" can be adjusted.

•When the sequencer outputs a noise signal, a clicking might be heard from the speakers due to the characteristics of the circuit. This is not malfunction.

To change the delay time

The surround speakers reproduce sounds a split second after the front speakers. The delay is initially set to 20 ms (milliseconds).

To change the standard delay time, press MANUAL SELECT on the remote control repeatedly until "TIME" is

displayed. Then, press or on the remote control. Each time one of the buttons is pressed, the delay time changes as shown below.

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Precautions pg AiwaNSX-MTD9 Owners RecordPrecautions InstallationElectric Power AC power cordPrecautions cont. pg Table of ContentsSetting UP Preparations pgBefore connecting the AC cord Positioning the SpeakersConnections Front speakers Center speakerPreparations cont pg Connect the right and left speaker to the main unitConnect the surround speakers to the main unit Connect the center speakerConnect the video equipment Connect the Television to the video equipmentConnect the AC cord to an AC outlet To position the antennas FM feeder antennaConnecting AN Outdoor Antenna Remote ControlTo connect other optional equipment page 29 Inserting batteriesWhen to replace the batteries Using the remote controlPreset on the remote control Before OperationTo turn the power on To turn the power offIllumination guides Flash windowsPress Press oncePress twice to stop the remaining two numbers To mute the game soundSetting the Power Economizing Mode Preparations cont. pgPress ECO Press Enter within 4 secondsAudio Adjustments VolumeSound pg BBE SystemUsing the Beat Function Sound cont pgSuper T-BASS System Rhythm Play Function Beat Master DXPress Beat ON/OFF to switch the function on Turn Multi JOG to select the rhythm tempoUsing the Auto mode To stop the beat function Press Beat ON/OFFUsing the Fill in Function Using the Spice Function To use the Fill in functionSpice A/B function Press Spice aUsing the Auto Spice function Still holding down the button, turn Multi JOGPlay the music source Graphic Equalizer GEQSelecting the Programmed Equalization Curve Setting NEW Equalization Curves Manually To cancel the selected modeTo select the equalization curve with the remote control Sound cont. pgPress Frequency UP or Frequency Down to select a frequency To select a manual-preset GEQTo adjust the volume of the surround speakers Selecting a Programmed DSP Surround Mode When the music source is monauralTo select the DSP mode with the remote control DSP SurroundLoading Discs CD Playing pgBasic Operations Playing Discs CD Playing RANDOM/REPEAT PlayBlank Skip Play Press the numbered buttons 0-9 and +10 to program a track Press Prgm twice in stop modeProgrammed Play Manual Tuning Radio Reception pgPresetting Stations When an FM stereo broadcast contains noiseTo change the AM tuning interval Repeat steps 1Preset Number Tuning Selecting a preset number on the main unitTo clear a preset station Tape Playback pgTo select a reverse mode deck 2 only Playing Back a TapeTape Playback cont. pg Music SensorContinuous Play About cassette tapesRecording pg Basic RecordingREC/REC Sound Adjustment During RecordingInserting Blank Spaces Recording Dubbing a Tape ManuallyPress Sync DUB once or twice to start recording To set the Dolby NR when playing back the dubbed tapeDubbing the Whole Tape Press one of the Disc Direct Play 1-5 to select a disc AI Edit RecordingPress CD and load the discs Press CD EDIT/CHECK once Multi JOG Press CD and load the discs Press CD EDIT/ Check twice Recording contpgProgrammed Edit Recording Repeat for the rest of the tracks for side a To change the program of each side Adjusting Speaker Level BalanceDolby PRO Logic pg Press Dolby PRO Logic to select Normal Press Manual Select again to stop the noise signalTo change the delay time Additional Dolby PRO Logic Modes Dolby PRO Logic cont. pgPlay with Dolby PRO Logic To adjust the balance of connected speaker sound levels Karaoke pgMicrophone Mixing To select Phantom or 3 StereoTo change the delay time of echo When not using the microphonesLocal FADER/MULTIPLEX Functions To record microphone sound mixed with source soundKaraoke cont pg Karaoke ProgramAfter a track is played, it is cleared from the program Clock and Timer pg Setting the ClockSetting the Sleep Timer Clock and Timer cont pg Setting the TimerTo check the time remaining until the power is turned off To cancel the sleep timerPress Timer repeatedly until appears on the display Press one of the function buttons to select a sourceTimer Recording Connecting Optional Equipment When connecting a turntableVIDEO/AUX Jacks MD JacksSUB Woofer Jack CH Input JacksCD Digital OUT Optical Jack Listening to External SourcesConnecting a DVD Player To adjust the sound level of the external sourceOther Connections cont pg Listening to Dolby Digital Surround SoundPress VIDEO/AUX repeatedly until 5.1ch in is displayed Start playing Dolby Digital Surround sound on the DVD playerCare and Maintenance General pgCassette Deck Section Troubleshooting GuideTuner Section CD Player Section SpecificationsGeneral cont pg BBE System Copyright Parts IndexDolby NR/DOLBY PRO Logic Name Volume MIC Echo Disco Live Stadium Hall ECO Call toll free 1-800-BUY-AIWA. United States and Puerto Rico

NSX-MTD9 specifications

The Aiwa NSX-MTD9 is a dynamic and innovative stereo system that showcases the best of Aiwa's engineering prowess. This model is designed to deliver high-quality sound and a plethora of features that cater to music enthusiasts. With its compact design, the NSX-MTD9 fits seamlessly into any space, making it an ideal choice for both home and office environments.

At the heart of the NSX-MTD9 is a powerful amplifier that produces clear and dynamic audio across a wide range of frequencies. This system utilizes a specially designed speaker arrangement to ensure an immersive listening experience. The two-way speaker configuration, combined with a well-balanced woofer and tweeter setup, offers deep bass and crisp highs, creating a full sound that can fill any room.

One of the standout features of the Aiwa NSX-MTD9 is its built-in CD player, allowing users to enjoy their favorite CDs with rich sound quality. Additionally, the system supports cassette playback, enabling users to relive the nostalgia of their favorite mixtapes. The integrated AM/FM tuner provides access to a wide array of radio stations, ensuring endless entertainment options.

The NSX-MTD9 boasts several modern technologies, including the capability to connect via Bluetooth. This wireless functionality allows users to stream music from their smartphones and other Bluetooth-enabled devices, providing convenience and versatility. The inclusion of USB ports also enables easy playback from flash drives, making it simple to enjoy digital music collections.

Another impressive feature of the Aiwa NSX-MTD9 is its comprehensive equalizer settings. Users can customize their listening experience with adjustable presets, tailoring the sound profile to their personal preferences or to genre-specific requirements. The system also includes a remote control for hassle-free navigation of settings, tracks, and more.

In terms of design, the Aiwa NSX-MTD9 exhibits a modern aesthetic with a sleek finish that complements its high functionality. Its user-friendly interface ensures that even those unfamiliar with stereo systems can easily operate the NSX-MTD9.

In summary, the Aiwa NSX-MTD9 is a versatile and feature-rich stereo system that combines modern technology with high-quality audio performance. Its CD player, cassette functionality, Bluetooth connectivity, and customizable sound settings make it an excellent choice for music lovers who appreciate both classic and contemporary audio formats. With its stylish design and powerful features, the NSX-MTD9 stands out as a remarkable option in the world of personal audio systems.
Top Page Image Contents