Important Information for Installation and Use

1. Important Information for Installation and Use

1.Do not allow the flame to extend beyond the edge of the cooking utensil. This instruction is based on safety considerations.

2.Do not forget that the unit becomes hot when in use. Common sense is important. Just because the flame is out, it does not mean parts still cannot be hot.

3.This appliance shall not be used for space heating. This instruction is based on safety considerations.

4.Be sure to disconnect the electrical supply before disassembly of the appliance.

5.Keep the appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

6.Do not obstruct the flow of combustion and ventilation air.

7.Cabinets installed above the gas cooktop must have a minimum distance of 762 mm (30 ´´).

8.The gas pressure regulator supplied with the appliance must be installed in line with the gas pipe.

9.The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of the system at test pressures in excess of 3.5 kPa (1/2 psig). The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 3.5 kPa (1/2 psig).

10.Important:

When using a very large pot, keep a distance of at least 50 mm (2") to avoid damaging any parts in counter top wood, plastic or other non-heat- resistant materials. Never leave oil or hot fat unattended.

Note:

To avoid jeopardising the electrical safety of the appliance, it is forbidden to use high-pressure or steam jet cleaning devices.

Note:

The name plate is attached to the bottom of the unit and to the inside of the housing.

Only for installation in USA:

This installation must conform with local codes or, in absence of local codes, with the National Fuel Gas Code, ANSI Z 223.1 Current Issue.

The installer must leave these instructions with the appliance, and the consumer should keep them for future reference. If an external electrical source is utilized, the appliance must be electrically grounded in accordance with local codes, with the National Electrical Code ANSI/NFPA 70 Current Issue.

Only for installation in Canada:

In Canada, installation must be in accordance with the CAN 1-B149.1 and .2 – Installation Codes for Gas Burning Appliances and/or local codes. The installer must leave these Instructions with the appliance and the Consumer should retain them for future reference.

This appliance when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the current CSA Standard C 22.1-Canadian Electrical Code, Part I.

For mobile Housing and Recreational Vehicle installation must conform with the following:

CAN/CSA Z240 MH

CAN/CSA Z240 RV

Installation Requirement For Gas Burning Appliances And Equipment In Mobile Homes CSA Standard C 22:1 - Canadian Electrical Code Part 1 and /or local Codes.

KG 291 CA specifications

The Gaggenau KG 291 CA is an exemplary model in the high-end kitchen appliance segment, designed for consumers who appreciate the perfect blend of functionality, style, and innovative technology. This integrated refrigerator is characterized by its aesthetic appeal and advanced features, making it a centerpiece in modern kitchens.

One of the standout features of the KG 291 CA is its spacious interior, with a net capacity that allows for ample storage of groceries and perishables. The adjustable shelves offer flexibility, enabling users to customize the layout according to their storage needs. Additionally, the fridge is equipped with a dedicated vegetable drawer, which includes humidity control to ensure that fruits and vegetables remain fresh and crisp for extended periods. The energy-efficient LED lighting illuminates the interior, providing visibility while also minimizing energy consumption.

The refrigerator employs Gaggenau's innovative cooling technologies, including a dynamic cooling system that ensures consistent temperature distribution throughout the unit. This is crucial for preserving food quality, as temperature fluctuations can lead to spoilage. The KG 291 CA also features a NoFrost system, which eliminates the need for manual defrosting, adding convenience to the user experience.

In terms of design, the Gaggenau KG 291 CA boasts a sleek and minimalist aesthetic, often available in a stainless steel finish that complements any modern kitchen décor. Its ergonomic design includes a reversible door, providing flexibility in installation according to kitchen layouts. The flush installation feature allows the refrigerator to seamlessly blend with cabinetry, further enhancing its stylish presentation.

An important aspect of the KG 291 CA is its smart technology integration. The fridge can connect to a home network, allowing users to monitor and control settings remotely through a smartphone app. This feature is particularly beneficial for those who may forget to adjust temperatures or who want to ensure freshness before leaving home.

Safety features are also paramount in the design of the KG 291 CA. It includes a child lock function and an alarm that signals if the door has been left open for an extended period, thereby preventing food spoilage and enhancing energy efficiency.

In conclusion, the Gaggenau KG 291 CA is a premium refrigerator that excels in both performance and design. Its combination of spaciousness, innovative cooling systems, smart technology, and elegant aesthetics makes it a top choice for discerning consumers looking for reliability and luxury in their kitchen appliances.