Troubleshooting

Unit does not turn on

Not plugged in.

Fuse blown or circuit breaker tripped.

Noise or vibration

Check that unit is level.

Unit is too warm

Check that doors are properly sealed.

To change the temperature, follow the steps in the Operating Your Beverage Cooler section of this manual.

LCD displays “PROBE ERROR – E”

This message is an ALARM MODE indication. The LCD displays “PROBE ERROR” on the left and “E”in the middle when the thermostatic sensor has malfunctioned. When this happens, the Cooler first stops working for 25 minutes, then turns ON for 30 minutes and OFF for 20 minutes automatically and continuously. Contact your authorized service facility for sensor replacement.

LCD displays “LOW TEMP”

This message is an ALARM MODE indication. The LCD displays “LOW TEMP”on the left and the letter ”L”in the middle. It indicates that the actual temperature in the compartment is 32ºF or lower and that the magnet valve may not be functioning properly and should be replaced. Contact your authorized service facility immediately.

LCD displays “HIGH TEMP”

This message is an ALARM MODE indication. The LCD displays “HIGH TEMP”on the left and the actual temperature reading in the middle. It indicates that the actual temperature is much higher than your set temperature. Possible causes are:

•One or both of the doors might not be fully closed.

•The refrigerant may have leaked.

•The magnet valve may not be functioning properly and should be replaced.

If you are certain that the doors are not the cause of the problem, contact your authorized service facility immediately.

LCD displays “H” or “L”

If either message is displayed in the Temperature Display zone in the middle of the LCD, the ambient temperature around your appliance may be beyond the range of the two-digit LCD, which can only display temperatures between -9ºF and 99ºF. If the ambient temperature is below -9ºF, an “L”will be displayed (but not “LOW TEMP”). If the temperature is above 99ºF, an “”H”will be displayed.

These occurrences are not malfunctions. Either move your unit to a more suitable location or change the ambient temperature.

FBC36OD specifications

Franklin Industries, L.L.C has established itself as a leader in the manufacturing of innovative and efficient industrial solutions. Among its standout products is the FBC36OD, a versatile and high-performance device designed to meet the demanding needs of various industries. This machine is renowned for its durability, functionality, and cutting-edge technology, making it a preferred choice for many professionals.

The FBC36OD features a robust construction that allows it to operate reliably in even the most challenging environments. Its frame is made from high-strength materials that ensure longevity and resistance to wear and tear. This reliable build quality is complemented by its advanced design, which emphasizes ease of use and maintenance.

One of the main characteristics of the FBC36OD is its impressive operational efficiency. It is equipped with a state-of-the-art engine that optimizes fuel consumption while delivering powerful performance. This balance between power and efficiency makes it ideal for heavy-duty tasks without compromising on cost-effectiveness.

Technologically, the FBC36OD incorporates several innovations that enhance its functionality. The machine features intuitive controls that streamline operation, allowing users to adapt quickly to various tasks or requirements. Additionally, its advanced diagnostic system enables real-time monitoring of performance and maintenance needs, reducing downtime and improving productivity.

The FBC36OD is also designed with versatility in mind. It can easily be adapted for a wide range of applications, from construction sites to manufacturing facilities. This adaptability ensures that it can fulfill the needs of different sectors while providing consistent results.

In summary, Franklin Industries, L.L.C’s FBC36OD stands out in the industrial equipment market due to its robust construction, operational efficiency, and advanced technologies. Its user-friendly design combined with its ability to handle various tasks make it an ideal choice for professionals seeking reliability and performance. As industries continue to evolve, the FBC36OD is poised to remain a top contender in providing effective solutions for modern industrial challenges.