EdgeStar CWR460DZ owner manual Installing the Wine refrigerator, Types of Installation

Page 6

Installing the Wine refrigerator

The wine refrigerator should be installed in accordance with local electrical code requirements. The wine refrigerator should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty.

Before you plug the wine refrigerator into a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.

Unpacking the Wine refrigerator

WARNING: Use two more people to move and install the wine refrigerator. Failure to do so can result in back or other injury. Carefully remove the packaging materials. Remove any shipping tape and glue from your wine refrigerator before using. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your wine refrigerator.

IMPORTANT: Do not remove any safety, warning, or product information labels from your wine refrigerator.

Types of Installation

This wine refrigerator has been designed for free-standing, or built-in installation. In every case, there must be adequate ventilation and access for service.

Free-standing installation:

A free-standing installation will allow you to install the wine refrigerator in almost any place you desire. You must follow the stated instructions for electrical requirements, and leveling the wine refrigerator.

Built-in installation:

A recessed installation will allow you to install the beverage cooler under a counter or in a kitchen cabinet provided the required clearance space around the beverage cooler is followed.

It is necessary to allow adequate ventilation space around the unit (make sure there is at least some ventilation room for the back of the unit). The following additional items must be observed.

1.Place the wine refrigerator in front of the installation location. Adjust the feet and place the unit flat on the floor or on a platform depending on your installation requirements.

2.If the electrical outlet for the wine refrigerator is behind the cabinet, plug in the wine refrigerator.

3.Push the wine refrigerator into position.

WARNING: Do NOT install the wine refrigerator behind a closed cabinet door.

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CWR460DZ Important Safety Information General SafetyTable of Contents Introduction For Your RecordsParts Identification Back ViewInstalling the Wine refrigerator Types of InstallationInstallation Clearance Requirements Top ViewElectrical Requirements Leveling the Wine RefrigeratorInstalling the Door Handle Installing and Removing the ShelvesReversing the Door Swing To reverse the door from right swing to left swingUsing the Temperature Control Panel Normal Sounds DefrostingPreparing the Wine Refrigerator for Storage Exterior Cleaning Interior CleaningSymptoms Possible causes Solutions Troubleshooting Issue Possible cause SolutionSpecifications CWR460DZEdgeStar Limited Warranty One 1 Year Parts & Ninety 90 Days Labor

CWR460DZ specifications

The EdgeStar CWR460DZ is a sophisticated wine cooler designed to bring the ideal environment for wine storage to both enthusiasts and casual drinkers alike. With a sleek and modern design, it stands out as an attractive addition to any home, bar, or restaurant, while offering functionality and performance that are key to preserving the integrity of wine.

One of the main features of the CWR460DZ is its dual-zone temperature control system. This allows users to store different types of wine at their optimal temperatures, typically between 41°F and 64°F. The upper zone is perfect for white wines, while the lower zone is suited for reds, ensuring that each bottle is ready to serve at its best. This flexibility is particularly beneficial for those who enjoy a varied collection of wines, as it accommodates the requirements of both white and red varietals.

Equipped with a powerful compressor cooling system, the EdgeStar CWR460DZ ensures consistent temperatures throughout the unit. This technology minimizes fluctuations that can negatively impact wine, delivering an efficient cooling process that preserves flavor and aroma. Additionally, it features a built-in fan that promotes even air circulation, further enhancing temperature stability.

The unit boasts a capacity of 46 bottles, making it ideal for wine collectors and casual drinkers alike. Its removable wooden shelves provide an elegant touch while allowing for customized storage options based on bottle size and shape. The shelves are designed to be appropriately spaced to accommodate standard-sized wine bottles, showcasing a thoughtful design that prioritizes accessibility.

The CWR460DZ also features a blackout glass door, which not only offers a stylish appearance but also protects wines from harmful ultraviolet (UV) rays that can cause oxidation and spoilage. The interior LED lighting not only enhances visibility but also allows for energy-efficient operation, ensuring that the well-being of the wine is maintained.

In conclusion, the EdgeStar CWR460DZ wine cooler is a versatile and stylish option for anyone looking to store their wine collection effectively. With its dual-zone temperature control, compressor cooling technology, and elegant design features, it combines functionality with aesthetics, making it a standout choice for wine enthusiasts seeking to preserve and enjoy their collection.
Top Page Image Contents