EdgeStar CWR460DZ owner manual Installing the Door Handle, Installing and Removing the Shelves

Page 9

Installing the Door Handle

To install the door handle:

1.Open the door and carefully pull the door gasket around the area where the handle is to be installed.

2.Carefully remove the two pre-installed decorative plugs from the front of the door. Note: some wine coolers do not have decorative plugs installed.

3.Insert each Phillips head screw through the gasket side of the door until the screw pass through the door.

4.Align the handle with the screws and tighten using a Phillips head screwdriver until the handle is flush against the door frame.

CAUTION: Do not over-tighten the screws as this may cause damage to the handle or to the stainless steel door

5.Carefully press the door gasket into its original position.

Installing and Removing the Shelves

To prevent damaging the door gasket, make sure to open the door all the way before pulling the shelves out of their track.

To install the shelves:

1.Open the door completely.

2.Slide the shelf on the shelf track and slowly push back until it stops.

3.Push down on the front of the shelf to allow the back of the shelf to lift over the plastic post. (Imagine a seesaw movement.) Continue to push the shelf back until both notches pass through the plastic posts on each side of the shelf track.

4.Continue to push the shelf back.

To remove the shelves:

1.Open the door completely.

2.If necessary, make sure you remove all the contents sitting on the shelf.

3.Pull the shelf forward until the notch aligns with the plastic post on each side of the shelf track.

4.Lift the shelf until both notches pass through the posts.

5.Continue to pull the shelf forward until it is completely removed from the inner compartment.

EdgeStar Wine Refrigerator

6

Image 9
Contents CWR460DZ General Safety Important Safety InformationTable of Contents For Your Records IntroductionBack View Parts IdentificationTypes of Installation Installing the Wine refrigeratorTop View Installation Clearance RequirementsLeveling the Wine Refrigerator Electrical RequirementsInstalling and Removing the Shelves Installing the Door HandleTo reverse the door from right swing to left swing Reversing the Door SwingUsing the Temperature Control Panel Normal Sounds DefrostingPreparing the Wine Refrigerator for Storage Exterior Cleaning Interior CleaningSymptoms Possible causes Solutions Issue Possible cause Solution TroubleshootingCWR460DZ SpecificationsOne 1 Year Parts & Ninety 90 Days Labor EdgeStar Limited Warranty

CWR460DZ specifications

The EdgeStar CWR460DZ is a sophisticated wine cooler designed to bring the ideal environment for wine storage to both enthusiasts and casual drinkers alike. With a sleek and modern design, it stands out as an attractive addition to any home, bar, or restaurant, while offering functionality and performance that are key to preserving the integrity of wine.

One of the main features of the CWR460DZ is its dual-zone temperature control system. This allows users to store different types of wine at their optimal temperatures, typically between 41°F and 64°F. The upper zone is perfect for white wines, while the lower zone is suited for reds, ensuring that each bottle is ready to serve at its best. This flexibility is particularly beneficial for those who enjoy a varied collection of wines, as it accommodates the requirements of both white and red varietals.

Equipped with a powerful compressor cooling system, the EdgeStar CWR460DZ ensures consistent temperatures throughout the unit. This technology minimizes fluctuations that can negatively impact wine, delivering an efficient cooling process that preserves flavor and aroma. Additionally, it features a built-in fan that promotes even air circulation, further enhancing temperature stability.

The unit boasts a capacity of 46 bottles, making it ideal for wine collectors and casual drinkers alike. Its removable wooden shelves provide an elegant touch while allowing for customized storage options based on bottle size and shape. The shelves are designed to be appropriately spaced to accommodate standard-sized wine bottles, showcasing a thoughtful design that prioritizes accessibility.

The CWR460DZ also features a blackout glass door, which not only offers a stylish appearance but also protects wines from harmful ultraviolet (UV) rays that can cause oxidation and spoilage. The interior LED lighting not only enhances visibility but also allows for energy-efficient operation, ensuring that the well-being of the wine is maintained.

In conclusion, the EdgeStar CWR460DZ wine cooler is a versatile and stylish option for anyone looking to store their wine collection effectively. With its dual-zone temperature control, compressor cooling technology, and elegant design features, it combines functionality with aesthetics, making it a standout choice for wine enthusiasts seeking to preserve and enjoy their collection.