Aga Ranges ACIM-15 manual Troubleshooting Three

Page 16

TROUBLESHOOTING THREE

PROBLEM

POSSIBLE CAUSE

CORRECTION

 

 

 

Ice is not clear.

Low water level in reservoir.

Make sure that the reservoir drain plug is installed properly. Check the water line to the unit to make sure there are no restrictions or kinks in the line. Check all filters to make sure they are not restricted or plugged.

Softened water supply.

Make certain that water line is not connected to the water

 

softener.

Room temperature is too cold.

Move the unit to an area where room temperature is above 55° F.

Low ice production. Unit is running,

Low water level in reservoir.

Make sure that the reservoir drain plug is installed properly.

 

has run over a 48 hour period, and

Distributor tube is restricted.

Check the water line to the unit to make sure there are no

there is little ice in bin.

 

restrictions or kinks in the line. Check all filters to make

 

 

sure they are not restricted or plugged.

 

 

Build up of deposits on evaporator plate.

See "CLEANING YOUR ICE MACHINE" section for clean-

 

 

ing the unit for proper operation.

 

 

Restriction in drain lines will cause ice in the bin to melt. If

 

 

 

using a gravity drain, make certain there are no kinks or

 

Inadequate drain system.

restrictions in the drain lines. If using a drain pump, check

 

 

the inlet screen, discharge line, and vent line for any build-

 

 

up or restrictions.

 

 

Make certain the grille in the front of the unit is free and

 

 

 

open for proper air circulation. Check and clean the con-

 

Condenser fan air flow is restricted.

denser coil by removing the grille in the front of the unit.

 

 

Clean the condenser with a vacuum and brush attachment.

 

 

 

 

Unit continues to run and produce ice.

Ice bin is not full.

The unit will automatically shut down when ice reaches the

 

sensing tube.

Ice bin is full.

The unit will automatically shut down when ice reaches the

 

sensing tube and has completed the harvest of the ice slab.

Room temperature is too warm.

Move the unit to an area where room temperature is below

 

90° F.

Ice machine is not level.

Use a level to check the unit for level from side to side and

 

front to rear.

Grid-cutter is not cutting the ice

The selector switch is not in the "ON"

Set the rocker switch on the grille of the ice machine to the

slab.

position.

"ON" position.

 

The grid cutter is not plugged into the

Remove the escutcheon panel and plug the grid-cutter into

 

 

receptacle.

the receptacle on the side of the line.

 

Time to cut through the slab

It can take up to 35 minutes to cut through a harvested ice

 

 

 

slab. This is normal operation.

 

 

 

 

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Aga ACIM-15 Page Page Starting OUT Remove PackagingExterior Damage Concealed DamagePage Drain Plumbing Installation Drain PlumbingGravity Drain Location Water Supply Water SupplyOperation Care of the Unit Care of UnitNormal Responsibilities of the Owner Help Prevent TragediesCleaning Your Ice Machine Caring for Your ICE MachineThings to Remember Things to RememberPage Obtaining Service Before Calling for ServiceHow to Obtain Service For Your RecordsPage Troubleshooting ONE Problem Possible Cause CorrectionTroubleshooting TWO Troubleshooting Three Troubleshooting Four Page

ACIM-15 specifications

The Aga Ranges ACIM-15 is a culinary masterpiece that combines traditional craftsmanship with modern technology, designed for both professional chefs and passionate home cooks. This versatile range offers a host of features and characteristics that elevate the cooking experience, making it an essential addition to any kitchen.

One of the standout features of the ACIM-15 is its unique cast iron construction, which allows for excellent heat retention and even heat distribution. This ensures that foods are cooked uniformly, preventing hot spots that can lead to uneven results. The iconic design not only adds a touch of elegance but also serves a functional purpose, allowing for perfect results whether you are baking, roasting, or simmering.

The ACIM-15 boasts a powerful convection oven, which circulates hot air for consistent cooking results. With a range of temperature settings, the oven accommodates various cooking techniques, from slow-roasting meats to baking artisan bread. The oven capacity is generous, allowing for multiple dishes to be cooked simultaneously, making it ideal for large gatherings or hosting dinner parties.

In addition to its impressive oven capabilities, the ACIM-15 features a robust cooktop with multiple burners that cater to various cooking needs. The burners deliver high BTU output, providing quick and responsive heating. This allows chefs to achieve rapid boil times for pasta or to quickly sear meats to lock in flavors. The cooktop is designed with durability in mind, featuring easy-to-clean surfaces that withstand heavy use.

Aga Ranges is synonymous with innovation, and the ACIM-15 is no exception. The range incorporates smart technology that allows for precise temperature control and monitoring. With built-in timers and programmable functions, users can manage their cooking with ease, ensuring that every dish is executed flawlessly.

Moreover, the ACIM-15 is designed with energy efficiency in mind. While delivering powerful performance, it utilizes energy-saving technologies to minimize consumption without compromising on cooking quality. This makes it an environmentally conscious choice for those looking to reduce their carbon footprint.

In summary, the Aga Ranges ACIM-15 is a blend of tradition and innovation. With its cast iron construction, powerful convection oven, robust cooktop, and smart technology, it stands out as a premier choice for culinary enthusiasts. Whether you are preparing a simple weekday meal or an elaborate feast, the ACIM-15 is equipped to deliver exceptional results, making cooking an enjoyable experience.
Top Page Image Contents