Aga Ranges U110054 - 03A Regulations, Installation Safety Instructions, Location of the Range

Page 26

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

7. Installation

Regulations

Installation of this range must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition.

In Canada, installation must conform with the current Natural Gas Installation Code, CAN/CGA-B149.1 or the current Propane Installation Code, CAN/CGA-B149.2, and with local codes where applicable.

This range has been design-certified by CSA International according to ANSI Z21.1, latest edition and CAN/CGA-22.2 latest edition.

Read the instructions before installing or using this appliance. This range becomes hot in use, the cooktop burners produce exhaust gases.

The range must be electrically grounded in accordance with local codes or, in the absence of local codes, in accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada, electrical grounding must be in accordance with the current CSA C22.1 Canadian Electrical Code Part 1 and/or local codes. See ‘Electrical Connection’ in this section.

Important

Observe all governing codes and ordinances.

The range must be properly grounded.

Save these instructions for the local electrical inspector’s use.

For Your Safety

Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

If you smell gas

Open windows

DO NOT touch electrical switches

Extinguish any open flame

Immediately call your gas supplier

Installation Safety Instructions

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, manufacturer (dealer) or the gas supplier.

NEVER reuse old flexible connectors. The use of old flexible connectors can cause gas leaks and personal injury. Always use NEW flexible connectors when installing a gas appliance.

Important!

Remove all packing material and literature from oven before connecting gas and electrical supply to range.

Have your range installed by a qualified installer.

Your range must be electrically grounded in accordance with local codes or, in the absence of local codes, in accordance with the National Electrical Code (ANSI/ NFPA 70, latest edition).

Before installing your range on linoleum or any other synthetic floor covering, make sure the floor covering can withstand 180°F (80°C) without shrinking, warping or discoloring. Do not install the range over carpeting unless a sheet of ¼’’ thick plywood or similar insulator is placed between the range and carpeting.

Make sure the wall coverings around the range can withstand heat generated by the range up to 200°F (90°C).

Avoid placing cabinets above the range. There must be a gap of at least 31½’’ (80 cm) between the top of the range and any combustible surface above it.

If a ventilating hood is installed above the range follow the installation instructions supplied with the hood.

Items of interest to children should not be stored above a range – children climbing on the range to reach items could be seriously injured.

Converting to Propane Gas

This appliance is supplied set for Natural gas.

A conversion kit for Propane gas is supplied with the range.

If the appliance is to be converted this must be done before installation. The conversion must be performed by a qualified LP gas installer. See the Conversion section at the back of this installation manual for more details.

Location of the Range

Do not locate the range where it may be subject to strong drafts. Any openings in the floor or wall behind the range should be sealed. Make sure the openings around the base of the range that supply fresh air for combustion and ventilation are not obstructed by carpeting or woodwork.

Your range is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. Use care when moving the range on this type of flooring. It is recommended that the following instructions be followed to protect your floor.

The range should be installed on a sheet of plywood (or similar material). When the floor covering ends at the front of the range, the area that the range will rest on should be built up with plywood to the same level or higher than the floor covering.

24

Image 26
Contents User Guide Contents To Prevent Fire or Smoke Damage Important Safety InformationCase of Fire  Do Not Leave Children Alone or UnattendedWear Suitable Clothing Important Safety Notice and WarningProper Installation ConversionEnamel and may be cleaned off with a metal polish Placement of Oven RacksGeneral Safety Instructions Use the Right Size PanPage Range Overview Igniting Cooktop Burners without Electricity 5Fig.2-6AFig.2-9 Wok BurnerMulti-function Oven Function UseThaw and Serve Operating the OvenMulti-function oven modes -13 Convection OvenConventional Oven Top and Base Heat Self-CleaningFan Assisted Oven Browning ElementRemoving the Divider Sabbath ModeEnergy Saving Panel Feature To time something that is cooking minute minder ClockTo set the time of day To stop the oven automaticallyTo activate the key lock CookingKey Lock To turn off the key lockTo remove and refit the racks AccessoriesOven racks To remove and refit the telescopic rack and runnersTo Remove the Drawer Oven LightStorage Replace the storage drawerCooking with a Multi-function Oven Tips on Cooking with the TimerCooking Tips General Oven TipsCooking Table MeatTroubleshooting An oven light is not working Timed oven is not coming on when automatic cookingOven temperature getting hotter as the range gets older Essential Information Cleaning Your RangeCleaning for Spills Daily CareControl Panel and Oven Doors Self-Clean OvenMain Top Removing the oven door outer panel WARNING! The oven will still be hot Before using the self-clean functionSelf-Clean Operation Hours SoilingTo cancel the self cleaning cycle Cleaning Table TablePart Finish Recommended Cleaning method To start the self cleaning cycle automatically Warning Regulations InstallationInstallation Safety Instructions Converting to Propane GasGas line shut-off valve You will also need the following toolsAdditional materials you may need Checking the partsPositioning the Range Removing the Storage Drawer Moving the RangeRemoving the Oven Door  The range is very heavy. Take great careLeveling Installing the Flue GrilleCompleting the Move Anti-Tip Device Kit ContentsProcedure Wall AttachmentElectrical Connection Disconnect the supplied power cord from the terminal block Wire Conduit InstallationInstalling a 3-Wire Power Cord Black Provide Adequate Gas Supply Gas ConnectionGas Supply Requirements Canada CAUTIONleaks. do not use a flame to check for gas Flexible ConnectorConnect the Range to the Gas Supply Seal the Openings Final FittingMoving the Range for Servicing Range Operational ChecksCustomer Care Conversion to Another Gas For Your SafetyValve Adjustment Conversion to PropaneReplacing the Bypass Screw For safety’s sake push the drawer rails back out of the wayGas Regulator TypePressure Testing Stick on labelRefitting the Grille and Drawer Refitting the Flue GrilleCircuit Diagram Code DescriptionConnections Technical DataDimensions RatingsPage Page Consumer Warranty If further help is needed concerning this warranty, contact

U110054 - 03A specifications

The Aga Ranges U110054 - 03A is an exceptional cooking appliance that showcases a blend of traditional craftsmanship and modern technology. Designed for both aesthetics and functionality, this model embodies the essence of the classic Aga cooker while incorporating features that meet contemporary cooking demands.

One of the standout characteristics of the Aga U110054 - 03A is its iconic design. Available in a variety of colors and finishes, it serves as a statement piece in any kitchen, enhancing the overall decor while providing a warm, inviting atmosphere. The durability of the cast iron construction not only contributes to its longevity but also means that it retains heat exceptionally well, making it highly efficient for cooking.

The U110054 - 03A boasts a unique heat storage system. Unlike conventional ovens, which heat up and cool down quickly, the Aga operates at consistent temperatures. This feature allows food to cook evenly and enhances flavors. The cooker has multiple ovens that serve different functions, with one specifically designed for roasting, one for baking, and another for simmering. This versatility makes it an ideal choice for home chefs who appreciate the nuances of perfect meal preparation.

In terms of technology, the Aga U110054 - 03A integrates modern innovations. The cooker has an induction hob that offers precise temperature control, allowing for quick adjustments during cooking. This feature caters to the needs of those who prefer the responsiveness of induction cooking, combined with the authentic Aga experience. Additionally, the model includes built-in temperature gauges that help monitor cooking progress without opening the door.

Another key feature is the energy efficiency of the Aga U110054 - 03A. Designed to utilize energy smartly, it provides a cost-effective solution for home cooking while minimizing environmental impact. The continuous heat it maintains reduces the need for constant preheating, saving both time and energy.

Safety is paramount in the design of the Aga U110054 - 03A. It includes safety features such as cool-to-touch exterior surfaces and automatic shut-off mechanisms. These elements ensure peace of mind when cooking with family and pets around.

In summary, the Aga Ranges U110054 - 03A is not just a cooker; it is a culinary masterpiece that represents the fusion of traditional values with modern innovation. Its unique heat storage capability, versatile cooking options, advanced technologies, and captivating design make it a coveted addition to any kitchen. Whether you're a seasoned chef or an enthusiastic home cook, this Aga model promises to elevate your cooking experience to new heights.