DCS DS224 Connecting the Inlet Hose, Do not plug the product, At this stage

Page 10

INSTALLATION INSTRUCTIONS

STEP 7: CONNECTING THE DRAIN HOSE(S)

18a

19

”

-(750mm882.5mm)

34-”

882.5mm)-

 

29

 

4

 

 

 

 

/

 

 

 

 

3

 

 

 

 

”34-

 

”

 

 

2

 

4

 

 

/

 

/

 

 

1

 

3

(750mm

 

 

 

29

 

 

 

2

 

 

 

 

/

 

 

 

 

1

 

 

 

18b

 

 

R

DishDrawer® with Hose Joiner (see Plumbing Options).

Remember to slip the wire clip(s) on the drain hose(s) first.

18a Slip a wire clip over each drain hose, then push the hoses into the Drain Hose Joiner firmly, 5 clicks. Position the wire clip(s) between the two positioning ribs on the Drain Hose Joiner.

Attach the Drain Hose Joiner to the waste tee (see Plumbing Options). Ensure a snug fit. If required a hose clamp may be used.

18b When using the standpipe option (see Plumbing Options), hose(s) should not extend further than 43/4” (120mm) down the standpipe, in order to prevent siphoning.

19Attach the Drain Hose Support to the cabinetry (with the screw supplied) to prevent siphoning and to keep the drain hose(s) from kinking. If required, the Drain Hose(s) may be trimmed to a suitable length.

Important!

Minimum hole size to be connected to the waste tee is 1/2” (12.7mm).

Be sure the Drain Hose(s) are fully extended to prevent sagging (see diagram to the left).

The Drain Hose support must be used.

Drain Hose joiner must not support weight of hoses. Keep excess length of Drain Hose on the DishDrawer® side of the Drain Hose support or trim to suit.

STEP 8: CONNECTING THE INLET HOSE

20

WATER

 

SUPPLY

WARNING!

Important!

DO NOT cut the inlet hose.

DO NOT plug the product in

 

at this stage.

 

20Connect the Inlet Hose to the water supply. Be sure the sealing washer is in place. The hose coupling must be tightened a further half turn after seal contact.

TIP - Turn the water valve ON to check for any leaks.

Alternatively flexible stainless steel hose can be plumbed directly to the inlet valve using a 3/8” brass adaptor (p/n 526161) available from the nearest Fisher & Paykel Authorized Service Agent.

NOTE: SINGLE MODELS DO NOT HAVE A TOE KICK TO INSTALL. PROCEED TO STEP 12 FINAL CHECK LIST.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation Instructions Parts Supplied Installation PreparationBefore YOU Start Double & Single Models Tools NeededWater Softener Models Services SpecificationsDouble Models Drain ConnectionPlumbing Options OptionSingle Models CavityOption Removing the TUB Installation InstructionsMounting TAB Options Adjusting the Feet Double Models only Securing the ProductElectrical Connection Refitting the TUBDo not plug the product Connecting the Inlet HoseAt this stage Trimming the TOE Kick Double Models only Measuring the TOE Kick Double Models onlyRemove all sharp edges Customer Care FinalchecklistdoubleandsinglemodelsTrouble Shooting For the United States of America USA & Canada

DS224 specifications

The DCS DS224 is a high-performance, versatile storage solution designed for small to medium-sized businesses that require reliable data management and accessibility. It boasts a sleek and compact design, allowing for easy integration into various IT environments without consuming excessive space. The DS224 is engineered for optimal performance, featuring dual controllers that maximize throughput and redundancy, ensuring continuous availability of critical data even in the event of a hardware failure.

One of the standout features of the DCS DS224 is its expansive storage capacity. The device supports multiple drive configurations, allowing users to mix and match SSDs and HDDs to achieve a balance between performance and cost-efficiency. This flexibility empowers organizations to customize their storage architecture based on specific requirements, such as high-speed access for critical workloads or larger capacity for archiving purposes.

In terms of connectivity, the DS224 incorporates multiple interfaces, including 10GbE and 1GbE networking options, which facilitate seamless integration with existing infrastructure. The ability to connect to various networks not only enhances data transfer speeds but also streamlines access to virtual machines and other critical applications hosted on the device.

The DCS DS224 is equipped with advanced data protection technologies. Its built-in snapshot capabilities enable users to take point-in-time backups, ensuring that valuable data remains secure and recoverable in the event of accidental deletion or corruption. Additionally, the system includes support for dynamic RAID configurations, allowing for on-the-fly changes without downtime, minimizing disruption to business operations.

Management and monitoring of the DS224 are user-friendly, thanks to its intuitive web interface and comprehensive management tools. Administrators gain access to real-time performance metrics and health indicators, facilitating proactive maintenance and optimized resource allocation. Furthermore, the device supports various virtualization technologies, making it a suitable choice for organizations looking to streamline their virtual environments.

In conclusion, the DCS DS224 represents a robust and adaptable storage solution, equipped with features and technologies that cater to the diverse needs of modern businesses. Its blend of performance, scalability, and advanced data protection ensures that organizations can effectively manage their data while maintaining high levels of efficiency and security.
Top Page Image Contents